Canon 580EX II instruction manual FEL FE Lock, Focus the subject Press the FEL button

Page 17

FEL: FE Lock III1III[

FE (flash exposure) lock locks the correct flash exposure setting for any part of the scene.

With < ETTL > displayed on the LCD panel, you press the camera's <FEL > button. If the camera does not have the <FEL > button, press the <*> button.

Focus the subject.

Press the <FEL> button. (816)

Aim the subject at the center of the viewfinder and press the <FEL > button.

The Speedlite will fire a preflash and the required flash output for the subject is retained in memory. "FEL" will be displayed in the viewfinder for 0.5 sec.

Each time you press the <FEL> button, a preflash will be fired and a new flash exposure setting will be locked.

o If the subject is too far away and underexposure will result, the < ~> icon will blink in the viewfinder. Move closer to the subject and try the FE lock

again.

If <ETTL> is not displayed on the LCD panel, FE lock cannot be set. If the subject is too small, FE lock might not be very effective.

Image 17

Contents 580EXII Sboexii Thank you for purchasing a Canon product Contents Nomenclature ~y\l~~g/p~~,7i11Uminationl Ir=J -J--~~~~1~~n Aal.aau.aa Getting Started and Basic Operation Install the batteries Installing the BatteriesOpen the cover Close the coverAttach the Speedlite Attaching to the CameraSecure the Speedlite Detach the SpeedliteAbout Auto Power Off \1 Set the power switch to onCheck that the flash is ready About Quick FlashEttl is displayed Press the Mode button so thatFlash Sync Speeds and Apertures Used Using E-TTL II and E-TTL Autoflash in the Shooting Modes BIUsing Flash Select ~ ~ Flash Exposure Compensation l II 111I LIISet the flash exposure compensation amount Press the @ buttonFEB will be set Set the flash exposure bracketing amountTurn the @ dial to set the amount Focus the subject Press the FEL button FEL FE LockIHigh-speed Sync Set the Bounce Direction Catchlight panel will come out at the same time Creating a CatchlightPress the ZOOM/~ button ZOO M Setting the Flash Coverage and Using the Wide PanelUsing the Wide Panel Auto Zoom for Image Size Figures for increased flash output Flash Output DisplayMetered Manual Flash Exposures Set up an 18% gray cardSet the camera and Speedlite Focus the subjectPress the @ button to select the item blinks Set the desired numberCalculating the Shutter Speed Flash Output Maximum Stroboscopic FlashesPress the ~H / ~ button so that ~ is displayed ~ Second-Curtain Sync ,11111111 11111111 II I IIICustom FunctionFunction Fn Setting Custom Functions 1\\1.\\\.\\~\.1\Press the €J button Change the settingTurn the @ dial to set the Custom Function No Page External Flash Metering IRlln Set the Speedlite to the cameras aperture setting Speedlite Control with the CamerasMenu Screen Setting Speedlite functionsSpeedlite Custom Functions Clear All Speedlite Custom FunctionsWireless Flash Positioning and Operation Range Wireless flash with three slave groups p.43 Multi-Speedlite, Wireless Lighting ConfigurationsWireless flash with two slave groups p.41 Slave Unit Setting Set it as a slave unit Master Unit SettingSet the master unitsflash mode Fully Automatic Wireless FlashSet the camera-attached 580EX As the master unitSet the camera and shoot Check the flash operationMaster UnitsFlash ON/OFF Setting the Communication Channel Using Fully Automatic Wireless FlashSo that . blinks Set the channel NoSet the wireless mode to Setting the Slave UnitsFlash Ratio with E-TTL Press the ZOOM/~ buttonSet the wireless mode to Setting the Master Unit and ShootingSet the slave Set the flash ratioSet the slave units Wireless Flash with Three Slave GroupsSet the master unit and shoot Follow Setting the Master Unit Shooting on page 42. In stepSo that -1·1.- blinks Setting the Flash Output for Each SlavePress the Mode button so Stroboscopic Flash Setting Manual Flash and Stroboscopic Flash with the SlaveManual Flash Reference 8J1I1I/~1I/~ 8 About the AF-Assist Beam About Color Temperature Information TransmissionPower turns off by itself Troubleshooting GuideSpeedlite does not fire Slave unit does not fireFlash range scale bars blink Type SpecificationsWireless Flash Quick Flash Guide No. at ISO 100, in meters/feetFeatures Available with Type-B Cameras Page European Union and EEA only Canon Canon Canon mUfHJ1.lE ~~&~~ ~~~

Related manuals

Manual 58 pages 6.29 Kb

580EX II specifications

The Canon 580EX II is a powerful external flash unit designed for both amateur and professional photographers seeking to enhance their lighting capabilities. As a part of Canon's Speedlite series, the 580EX II offers a range of main features and advanced technologies that make it an essential tool for any photography setup.

One of the most notable features of the Canon 580EX II is its impressive guide number of 58 at ISO 100, which provides strong illumination for both close-up and long-distance subjects. This high guide number allows photographers to achieve effective lighting in various situations, whether shooting indoors or outdoors. The flash head can also tilt up to 90 degrees and rotate 180 degrees in either direction, allowing for versatile bounce and indirect lighting techniques that help produce soft, natural-looking shadows.

The 580EX II is equipped with Canon's E-TTL II (Evaluative Through-The-Lens) flash metering technology. This advanced metering system enables the flash to communicate with the camera to achieve optimal exposure settings automatically. The result is a more consistent and accurate portrayal of subjects in various lighting conditions, reducing the likelihood of overexposed or underexposed shots.

Another key characteristic of the 580EX II is its fast recycle time, which allows photographers to take multiple shots in quick succession without significant delays. This is especially beneficial during dynamic shooting scenarios like events or wildlife photography, where timing is crucial. The flash can operate in both manual mode for full control or in automatic mode for ease of use, catering to different shooting preferences.

The Canon 580EX II is also compatible with a variety of Canon EOS cameras, ensuring seamless integration into existing camera systems. Additionally, it supports wireless flash photography, allowing for creative off-camera flash setups when paired with compatible Canon camera bodies. Photographers can experiment with different lighting angles and configurations to enhance their creative vision.

Durability is an important factor in the design of the 580EX II, featuring a robust construction that can withstand the rigors of professional use. It also includes a dust and moisture-resistant design, providing added protection when shooting in challenging environments.

In summary, the Canon 580EX II stands out as a versatile and powerful flash unit, combining numerous features and advanced technologies that cater to the needs of photographers. Its high guide number, E-TTL II integration, fast recycle time, and durability make it a reliable choice for enhancing any photography experience. Whether used for portraits, events, or creative lighting, the 580EX II is an invaluable asset in the photographer's toolkit.