Canon 580EX II 1 Set the power switch to on, Check that the flash is ready, About Quick Flash

Page 11

Turning on the Power Switch ,II 11111 III 1111 111111111111111

\1 Set the power switch to <ON>.

l'" The flash recycling starts.

Check that the flash is ready.

•The pilot lamp will first turn green (ready for quick flash), then red (flash ready). Pressing the pilot lamp will fire a test flash.

About Quick Flash

Quick flash enables a flash to be fired before flash-ready, when the pilot lamp is still green.

Although the Guide No. will be 1/6 to 1/2 that of the full output, quick flash is effective for near subjects and when you want a shorter recycle time. Set the drive mode to single shooting. Quick flash cannot be used in the continuous shooting, FEB, manual flash, and stroboscopic flash modes.

[IliI Quick flash can also be used during continuous flash shooting. (C.Fn-06 ~ p.27)

About Auto Power Off

To save battery power, the power will turn off automatically after a certain period (approx. 1.5 min. to 15 min.) of idle use. To turn on the Speedlite again, press the camera'sshutter button halfway. Or press the Speed lite'stest firing button.

[IliI Auto Power Off can also be disabled. (C.Fn-01 ~ p.27)

[lJ • A test flash cannot be fired while the camera'soperation timer 04 or 06 is active.

•The Speedlite'ssettings will be retained in memory even after the power is turned off. To retain the Speedlite'ssettings after you replace the batteries, turn off the power and replace the batteries within 1 minute.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 580EXII Sboexii Thank you for purchasing a Canon product Contents Nomenclature ~y\l~~g/p~~,7i11Uminationl Ir=J -J--~~~~1~~n Aal.aau.aa Getting Started and Basic Operation Close the cover Installing the BatteriesInstall the batteries Open the coverDetach the Speedlite Attaching to the CameraAttach the Speedlite Secure the SpeedliteAbout Quick Flash \1 Set the power switch to onAbout Auto Power Off Check that the flash is readyEttl is displayed Press the Mode button so thatFlash Sync Speeds and Apertures Used Using E-TTL II and E-TTL Autoflash in the Shooting Modes BIUsing Flash Press the @ button ~ Flash Exposure Compensation l II 111I LIISelect ~ Set the flash exposure compensation amountFEB will be set Set the flash exposure bracketing amountTurn the @ dial to set the amount Focus the subject Press the FEL button FEL FE LockIHigh-speed Sync Set the Bounce Direction Catchlight panel will come out at the same time Creating a CatchlightPress the ZOOM/~ button ZOO M Setting the Flash Coverage and Using the Wide PanelUsing the Wide Panel Auto Zoom for Image Size Figures for increased flash output Flash Output DisplayFocus the subject Set up an 18% gray cardMetered Manual Flash Exposures Set the camera and SpeedlitePress the @ button to select the item blinks Set the desired numberCalculating the Shutter Speed Flash Output Maximum Stroboscopic FlashesPress the ~H / ~ button so that ~ is displayed ~ Second-Curtain Sync ,11111111 11111111 II I IIICustom FunctionFunction Fn Setting Custom Functions 1\\1.\\\.\\~\.1\Press the €J button Change the settingTurn the @ dial to set the Custom Function No Page External Flash Metering IRlln Set the Speedlite to the cameras aperture setting Clear All Speedlite Custom Functions Setting Speedlite functionsSpeedlite Control with the CamerasMenu Screen Speedlite Custom FunctionsWireless Flash Positioning and Operation Range Wireless flash with three slave groups p.43 Multi-Speedlite, Wireless Lighting ConfigurationsWireless flash with two slave groups p.41 Slave Unit Setting Set it as a slave unit Master Unit SettingAs the master unit Fully Automatic Wireless FlashSet the master unitsflash mode Set the camera-attached 580EXSet the camera and shoot Check the flash operationMaster UnitsFlash ON/OFF Set the channel No Using Fully Automatic Wireless FlashSetting the Communication Channel So that . blinksPress the ZOOM/~ button Setting the Slave UnitsSet the wireless mode to Flash Ratio with E-TTLSet the flash ratio Setting the Master Unit and ShootingSet the wireless mode to Set the slaveSet the slave units Wireless Flash with Three Slave GroupsSet the master unit and shoot Follow Setting the Master Unit Shooting on page 42. In stepSo that -1·1.- blinks Setting the Flash Output for Each SlavePress the Mode button so Stroboscopic Flash Setting Manual Flash and Stroboscopic Flash with the SlaveManual Flash Reference 8J1I1I/~1I/~ 8 About the AF-Assist Beam About Color Temperature Information TransmissionSlave unit does not fire Troubleshooting GuidePower turns off by itself Speedlite does not fireFlash range scale bars blink Type SpecificationsWireless Flash Quick Flash Guide No. at ISO 100, in meters/feetFeatures Available with Type-B Cameras Page European Union and EEA only Canon Canon Canon mUfHJ1.lE ~~&~~ ~~~
Related manuals
Manual 58 pages 6.29 Kb

580EX II specifications

The Canon 580EX II is a powerful external flash unit designed for both amateur and professional photographers seeking to enhance their lighting capabilities. As a part of Canon's Speedlite series, the 580EX II offers a range of main features and advanced technologies that make it an essential tool for any photography setup.

One of the most notable features of the Canon 580EX II is its impressive guide number of 58 at ISO 100, which provides strong illumination for both close-up and long-distance subjects. This high guide number allows photographers to achieve effective lighting in various situations, whether shooting indoors or outdoors. The flash head can also tilt up to 90 degrees and rotate 180 degrees in either direction, allowing for versatile bounce and indirect lighting techniques that help produce soft, natural-looking shadows.

The 580EX II is equipped with Canon's E-TTL II (Evaluative Through-The-Lens) flash metering technology. This advanced metering system enables the flash to communicate with the camera to achieve optimal exposure settings automatically. The result is a more consistent and accurate portrayal of subjects in various lighting conditions, reducing the likelihood of overexposed or underexposed shots.

Another key characteristic of the 580EX II is its fast recycle time, which allows photographers to take multiple shots in quick succession without significant delays. This is especially beneficial during dynamic shooting scenarios like events or wildlife photography, where timing is crucial. The flash can operate in both manual mode for full control or in automatic mode for ease of use, catering to different shooting preferences.

The Canon 580EX II is also compatible with a variety of Canon EOS cameras, ensuring seamless integration into existing camera systems. Additionally, it supports wireless flash photography, allowing for creative off-camera flash setups when paired with compatible Canon camera bodies. Photographers can experiment with different lighting angles and configurations to enhance their creative vision.

Durability is an important factor in the design of the 580EX II, featuring a robust construction that can withstand the rigors of professional use. It also includes a dust and moisture-resistant design, providing added protection when shooting in challenging environments.

In summary, the Canon 580EX II stands out as a versatile and powerful flash unit, combining numerous features and advanced technologies that cater to the needs of photographers. Its high guide number, E-TTL II integration, fast recycle time, and durability make it a reliable choice for enhancing any photography experience. Whether used for portraits, events, or creative lighting, the 580EX II is an invaluable asset in the photographer's toolkit.
Top Page Image Contents