Troubleshooting
Refer to this checklist first if you have any problems with your camcorder. Possible explanations are given for each problem on the list — turn to the page numbers in parentheses for more information.
Make sure that the camera is properly connected if you are using it with a TV or VCR. Consult your dealer or service outlet if problems persist.
E
Recording/Playback
Problem
?Nothing happens when I press the buttons.
?The camera turned itself off.
?The cassette compartment stopped
?The start/stop button doesn’t work.
?There’s no picture in the display.
?There’s a blank blue screen in the display.
?The camera won’t focus.
Cause and/or what to do about it
•The camera is not switched on
( 18, 27).
•The cassette is not loaded or is set for
erasure prevention (
•The tape has reached the end.
•The power source is not properly connected,or the battery pack is exhausted
or not properly attached (
•The function cannot be used in that
recording program ( 48).
•The camera was in record pause mode for
more than about five minutes ( 18).
•The battery pack is exhausted
(
•The battery pack’s power is exhausted. Recharge or change to a new battery pack
( 12).
•The cassette is not loaded or is set for
erasure prevention (
•The tape has reached the end.
•The POWER switch is not set to
CAMERA ( 18).
•You are attempting to play back or record from a copyright protected cassette
( 75).
•The video heads are badly contaminated
( 92).
•The camera is on manual focus ( 65).
•The viewfinder lens needs adjusting
( 86).
• The lens is dirty ( 92).
Information | Additional |
95