Canon zr10 instruction manual Setting the Self-Timer, Press the start/stop button

3_ZR10_E(34-72) 3/9/00 7:56 PM Page 60 (1,1)

Setting the Self-Timer

E

REC PAUSE

(LINE IN)

POWER

PHOTO CAMERA OFF VCR

POWER

CAMERA

OFF

VCR

START

/STOP PHOTO

SELF

TIMER MENU

Using the Full Range of Features

This is useful when you want to include yourself in the picture when recording movies or still photographs.

For movie

1.Set the camera to record pause mode.

2.Press the self-timer button on the body of the camera or

the SELF TIMER button on the wireless controller.

•SELF T. appears in the display.

•To have the subject monitor recording, rotate the LCD panel 180° ( 25).

3.Press the start/stop button.

•The camera starts to record after a 10-second countdown period (or after two seconds when you use the wireless controller). The time remaining counts down in the display (e.g. “5 SEC”).

•SELF T. disappears from the display when recording begins.

4.Press the start/stop button to end recording.

•When taking a still photo, set the self-timer and press a PHOTO button on the camera body or the wireless controller. The camera automatically adjusts the focus two seconds before the countdown is complete. The F mark flashes white then turns green after the focus and exposure are set. If you are using the wireless controller, the F mark starts flashing immediately after you press the PHOTO button. The camcorder takes the picture for approximately six seconds then automatically goes into record pause mode.

60