Readjusting the White Balance
Readjust the white balance manually when the color tone seems unnatural or if you want to change it to your desired tone.
To readjust the white balance, complete the following steps:
Press the WHITE BALANCE button (to turn on manual mode). Turn the WHITE BALANCE knob to adjust to the desired color tones. Turning the knob toward the RED side increases the red tones. Turning the knob toward the BLUE side increases the blue tones.
Operation panel |
|
|
| |||
POWER LIGHT | BACK | INPUT | WHITE BALANCE |
|
| |
| LIGHT | SELECT | EXPOSURE |
| ||
|
|
| AUTO | MANUAL | WHITE |
|
|
|
|
|
| PAPER |
|
|
|
|
| RED BLUE | LOW | HIGH |
Changing the angle to Letter/A4 size
To make the angle Letter/A4 size, press the ZOOM PRESET button. An indicator lights up and output image size will become Letter/A4 size. When changing the angle, use the ZOOM buttons.
Press the ZOOM PRESET button to make the angle Letter/A4 size.
The ZOOM PRESET indicator flashes when the ZOOM PRESET button is pressed.
Use the ZOOM buttons to change the angle.
The set angle may be slightly different from Letter/A4 size.
Operation panel
|
|
| ZOOM | STILL |
| FOCUS | ZOOM | PRESET | PICTURE |
AUTO | MANUAL |
|
|
|
|
| WIDE | TELE |
|
| NEAR | FAR |
|
|
D
Freezing an output image
To pause a moving output image, press the STILL PICTURE button. An indicator lights up and the output image freezes.
If you press the button again, the frozen image will start moving again.
When an output image is a moving picture, if you press the STILL PICTURE button, the output image will be frozen.
The STILL PICTURE indicator lights up while the image is frozen.
If you press the STILL PICTURE button again, the frozen picture will start moving again.
Operation panel
|
|
| ZOOM | STILL |
| FOCUS | ZOOM | PRESET | PICTURE |
|
|
|
| |
AUTO | MANUAL |
|
|
|
|
| WIDE | TELE |
|
| NEAR | FAR |
|
|
D
•You cannot make adjustments such as zoom, focus, or white balance while an image is frozen.
•You cannot save frozen pictures.
13