Canon RE-450X instruction manual Assembling

Page 9

2ASSEMBLING, STORING AND CONNECTION

Assembling

1	Unfold and raise the pair of illumination lamps.
	Raise the right-hand illumination lamp first ( ), then the left-

hand illumination lamp ( ).

2	Press the arm lock release lever, and raise the
	arm until it stops.

NOTICE Make sure to hold the arm when pressing the arm lock release lever. If the lever is pressed without holding the arm, the arm jumps up and may result in injury or malfunction. Please raise the arm slowly.

Direct the camera head towards the document

3 table.

Arm lock release lever

E

4	Remove the lens cap.
	Keep the lens cap in a safe place.

8

Image 9

Contents NTSC/PAL EnglishIntroduction Important WarningsConfirm that the package contains the following items FCC Notice Important Usage InstructionsImportant Safety Instructions Damage Requiring Service-Disconnect the product Contents Rear Panel Nomenclature and FunctionsOperation Panel Lights button/indicator Detail controlAssembling Fold the pair of illumination lamps very carefully StoringRGB cable ConnectionTurn on the power source of the other equipment to be used Turn the power onWhen operation is completed, turn the power OFF OperationManual Focusing Undesirable objects for focusingFilm Projection Readjusting the White Balance Changing the angle to Letter/A4 sizeFreezing an output image Projecting white documents Adjusting Brightness and Picture ContrastOutput Equipment System ConnectionChanging to Pictures via External Input Equipment VCR Recording by VCRCategory Abbreviation Meaning Functions Controlled by a ComputerSystem ControlTroubleshooting Resolution Specifications