Operation Panel
LIGHTS button/indicator | DETAIL control |
Use this button to turn ON the | Use this control to adjust picture quality (see page 14). |
illumination lamps for reflection | Turn the control to the HARD side to emphasize the |
copies. The indicator flashes | outline, turn to the SOFT side for softer outline. |
during preheating, and stays lit |
|
after preheating. |
|
BACK LIGHT button/indicator |
|
Use this button to turn ON the backlight |
|
for transparencies (see page 12). The |
|
indicator lights up when the backlight is |
|
used. |
|
INPUT SELECT button/indicator | FOCUS buttons/indicator |
Use this button to select input source to switch between pictures | Use this button to focus (see page 12). To |
via internal input (the unit’s camera head) and pictures via | focus manually, press the FOCUS button and |
external input (such as a computer) (see page 16). The indicator | then the NEAR button or the FAR button. |
lights up when external input equipment is selected. |
|
WHITE BALANCE | ZOOM buttons | |||
button/indicator/control | Press the WIDE button to change | |||
Use this button/knob to adjust color tone (see | the picture to | |||
TELE button to change the picture | ||||
page 13). To adjust manually, press the WHITE | ||||
to telephoto. | ||||
BLANACE button and turn the WHITE BALANCE | ||||
|
| |||
knob. Turn the knob to the RED side to increase |
|
| ||
red tone, or turn the knob to the BLUE side to |
|
| ||
increase blue tone. |
|
| ||
|
|
|
| |
POWER
| BACK | INPUT |
|
|
|
|
|
|
|
| ZOOM | STILL |
LIGHT | LIGHT | SELECT | WHITE BALANCE | EXPOSURE | DETAIL |
| FOCUS |
| ZOOM | PRESET | PICTURE | |
|
|
|
|
| ||||||||
|
|
| AUTO | MANUAL | WHITE |
| AUTO | MANUAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| PAPER |
|
|
| WIDE |
| TELE |
|
|
|
|
| RED BLUE | LOW HIGH | SOFT HARD |
| NEAR | FAR |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
POWER indicator
Lights up when the power is ON (see page 11).
WHITE PAPER button/indicator
Use this button to make a paper document on the table appear whiter. The indicator lights up when this function is on.
EXPOSURE control
Use this knob to adjust image brightness (see page 14). To increase brightness, turn the knob to the HIGH side. To decrease brightness, turn the knob to the LOW side. Brightness may not be adjusted effectively using the EXPOSURE knob if the image is too dark.
ZOOM PRESET button/indicator
Press the ZOOM PRESET button to set the angle for letter/A4 size paper (see page 13). The indicator lights up when the button is pressed.
STILL PICTURE button/indicator
Press the STILL PICTURE button to freeze a moving output image. When the button is pressed again, the moving picture will start running again (see page 13). The indicator lights up when the picture is frozen.
The illumination lamps and the backlight cannot be used at the same time.
7