Using the Multi-Image Screen
You can operate the
•When [M.S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback
•When [M.S.SPEED] is set to [FAST], [MODERATE] or [SLOW]: Playback pause In CAMERA mode, set the program selector to 
.
E
CAMERA | PLAY (VCR) |
1. Open the menu and select [D.EFFECT SETUP].
2. Select [D.E.SELECT] and set it to
3. Select [M.S.SPEED] and select the transition speed.
Following transition speeds can be selected: fast (every 4 frames), moderate (every 6 frames*), slow (every 8 frames*).
* In Low Light mode: moderate (every 8 frames), slow (every 12 frames).
4.Select [M.S.SPLIT], select the number of sequences and close the menu.
5.Press the DIGITAL EFFECTS ON/OFF button.
• MANUAL: Images will be captured each time you press the DIGITAL EFFECTS ON/OFF button. The blue frame indicating the next sequence disappears after the last image. Pressing the DIGITAL EFFECTS ON/OFF button for more than 1 second cancels the images one after another.
•FAST, MODERATE, SLOW: The set number of images will be captured at the set speed. To cancel the
6.Press the start/stop button to begin recording.
The
Turn off the digital effect when you do not use it.
The camcorder retains the setting even if you turn it off or change the program AE mode.
The image quality may be slightly lower with digital effects.
Digital effects cannot be used in the following cases:
-When the program selector is set to EASY.
-During DV dubbing.
About the multi-image screen:
The
-In the Night mode.
-When the widescreen mode is selected.
In PLAY (VCR) mode: Pressing any tape operation button (such as play or pause) cancels the
Recording | Advanced |
| Functions |
57