Playing Back a Tape with Added Sound
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds.
|
| CAMERA | PLAY (VCR) |
|
| |
MENU |
|
|
|
| ||
AUDIO SETUP |
| 12bit AUDIO•••STEREO1 | ||||
( |
| 34) |
| |||
|
|
|
|
| ||
|
|
|
|
|
|
|
E
1.Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu.
•STEREO1: Plays back the original sound.
•STEREO2: Plays back the added sound.
•MIX/FIXED: Plays back Stereo 1 and Stereo 2 in the same level.
•MIX/VARI.: Plays back Stereo 1 and Stereo 2. The mix balance can be adjusted.
2.If you have selected [MIX/VARI.], adjust the mix level: Open the menu and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance with the SET dial and close the menu.
Turn the SET dial down to increase the volume of Stereo 1 and up to increase the volume of Stereo 2.
The camcorder resets to [STEREO1] when you turn the camcorder off.
However, the mix balance is memorized by the camcorder.
Audio dubbing cannot be performed with your camcorder.
Playback | Advanced |
| Functions |
63