Canon GL2 instruction manual 103

Digitally Outputting Analog Video and Audio Signals (Analog-Digital Converter)

Connecting the camcorder to your VCR or 8 mm video camera allows conversion of recorded analog video and audio signals to digital signals in an instant. The digital signals can be output to the other equipment with a DV terminal. The camcorder’s DV terminal works exclusively as an output terminal.

•There may be cases where analog-digital conversion cannot be done properly, depending on the signals output from the connected equipment.

For example: Signals that include the copyright protective signal, or anomalous signals such as ones that include ghost signals, etc.

•You are recommended to use power from a household power source with a power adapter.

•Do not operate with a cassette inserted to the camcorder.

•Turn off the power of all equipment before performing connections.

•Refer also to the instruction manuals of the other equipment connected.

E

STV-250N Stereo Video Cable	OUTPUT
	L
	AUDIO
: Signal flow	R
	VIDEO

: Signal flow

S-VIDEO

S-150 S-video Cable

	DV
Side with	IN/OUT
arrow	Signal flow :

Above illustration shows the connection using a S-video cable. You can also connect the yellow plug to the VIDEO terminal instead.

Editing

103