Canon GL2 instruction manual Returning to a Pre-Marked Position Zero Set Memory

Returning to a Pre-Marked Position (Zero Set Memory)

E

ZERO SET	SEARCH
MEMORY	SELECT
AUDIO	REW	PLAY	FF
DUB.
AV	– /	STOP	+ /
INSERT

REMOTE SET PAUSE SLOW ⋅ 2

Use the wireless controller to mark a point on a tape to which you wish to return following the playback.

TAPE + CAMERA , TAPE + (VCR)PLAY

Playback

1.Press the ZERO SET MEMORY button on the wireless controller during playback at a point you wish to return to later.

•The time code is replaced by a tape counter that is set to zero with the  indication.

•Press the ZERO SET MEMORY button once more to cancel the zero set memory.

2.When you have finished playback, rewind or fast forward the tape. The tape stops automatically when it reaches the zero set position.

•`RTN or RTN1 appears in the display.

•The tape counter with  indication disappears from the display and the time code reappears.

Notes:

•The zero set memory may not function correctly when there is a break between recordings on the tape.

•You can also use zero set memory to mark a position on a tape in TAPE CAMERA mode. When you then play back the tape, pressing rewind will take you back to the pre-marked position.

•If you remove the tape while the zero set memory is set, the memory is canceled and the tape counter reverts to time code.

94