Canon DM-GL1 instruction manual Screen Displays, Turning off the LCD screen displays

Page 95

Screen Displays

To display the date and time on a connected TV, press the wireless controller’s DATA CODE button when the camera is in VCR mode with a tape

loaded. See p. 65 also.

TV

SCREEN

Press the wireless controller’s TV SCREEN button

DATA

to see or hide the other displays on the TV screen.

CODE

 

(The displays appear white on-screen.) They will

 

not be added to any recordings you make with the

 

camera. You can also display or hide (for a clear

 

screen while recording) the displays through TV

 

SCREEN in the camera menu. For instructions on

 

how to hook the camera up to your TV, see p. 30.

 

If you slide the POWER switch to OFF while in VCR mode, the DATA CODE and TV SCREEN will reset to show a clear screen.

indicates a flashing display.

E

Turning off the LCD screen displays

You can turn off the displays to give you a clear screen for playback.

Set the camera to VCR mode, open the VCR menu (page 34) and choose the DISPLAYS option. Set the displays to OFF <PLAYBK> and then close the menu.

The LCD screen will now be completely blank, but the camera will continue to show warning/caution displays when necessary.

Record pause mode (p. 21)

Recording (p. 21)

Shows how much battery power remains (p. 83).

The battery pack is exhausted (p. 83).

No cassette is loaded, or it is set for erasure prevention (p. 19-20).

Remaining tape

(Green: more than 5 min. Yellow: less than 5 min. Red: final few secs).

...finally, it tells you when you have completely run out of tape.

The camera is ejecting the tape (p. 19).

P AUS E

RE C

5min

E N D

E J E C T

The safety mechanism is activated. Unload the cassette and turn the camera off. Turn it on again and reload the cassette.

Recording mode (p. 22)

Playback is stopped (p. 28).

Normal playback (p. 28)

Fast forward (p. 28)

Rewind (p. 28)

Fast forward playback (p. 28)

Rewind playback (p. 28)

Frame advance playback (p. 29)

E J E C T

SP

S T OP

F F

REW

Information

Additional

95

Image 95
Contents Mode d’emploi Introduction Important Usage InstructionsImportant Safety Instructions Introduction Contents Getting started Thank you for Choosing a CanonIntroducing the GL1 OverviewQuick Finding Your Way Around the GL1Quick Overview Quick Overview Slow GL1 System Diagram Availability differs from area to area WD-58 Wide-converter Optional AccessoriesBattery Packs CB-900 Car Battery Adapter220EX Speedlite 380EX Speedlite 550EX Speedlite VL-10Li Battery Video LightCH-910 Dual Battery Charger/ Holder HC-4000 System CaseFinally, tighten the locking screw Attaching the Lens HoodRemove the lens cap Attach the DC coupler to the camera Powering the GL1Connecting the camera to an AC outlet Provide power from an AC outlet or Charge a battery packRemove the battery pack after use Charging and attaching the battery packAttach the battery pack to the power adapter CA-910 Compact Power Adapter Load or unload the cassette Loading a CassetteLoading and unloading Cassette memory Protecting tapes from accidental erasureHandling cassettes To record Using the Standby leverBefore you start recording Changing the recording mode SP/LP When you have finished recordingConfirmation/Warning beeps Demonstration modeTurning the camera recording displays ON/OFF Microphone attenuator40⋅/100⋅ digital zoom Zooming20⋅ optical zoom Changing the angle of the LCD screen Using the LCD ScreenOpen the LCD screen About the LCD Screen Adjusting the LCD screenAllowing the subject to monitor recording Built-in speaker and headphone terminal Other playback modes Attach a power source and slide the Power switch to VCRPlaying Back a Cassette Load the cassette Press the Play e button to start playbackSpecial playback If your TV or VCR has audio/video input terminals Connections for Playback on a TV ScreenIf your TV or VCR has an S-video input terminal Sound recording Using a tripodTips for Making Better Videos Holding the cameraCamera moves CompositionPicture angle Turning the Optical Image Stabilizer Off VCR menu Selecting from the MenusMenu Inserting batteries Using the Wireless Controller/Tally LampSetting the remote sensor mode Turning off the tally lamp Open the menu and select T.ZONE/DST Press the menu dial Setting the Date and TimeSetting the time zone/daylight saving time Set the camera to record pause modeSetting the clock Six-second auto date Setting the display styleDate and time display Filter Using the ND FilterPress the Photo button fully down to take the still picture Taking Still Pictures Photo ModeUsing the Full Range of Features Flash Charging Using a Canon Speedlite for Flash Photography optionalChoosing the Movie Mode Normal/Frame Record review Searching and Reviewing While RecordingRecord search Availability of functions in each recording program Using the Various Recording ProgramsEasy Recording Giving priority to shutter speed shutter-priority Tv AutoSpotlight Giving priority to the aperture aperture-priority AvManual See also p Sand & SnowUsing Digital Effects Widescreen TV recording Operating the digital effectsPress the D.E. ON/OFF button Press the start/stop button to start/stop recordingWind screen Selecting the audio modeAudio Recording Press the start/stop button to end recording Setting the Self-TimerPress the start/stop button Press the Exposure dial in once more Manual Exposure AdjustmentPress the Exposure dial in again Turn the Exposure dial to open or close the irisAbout the shutter speed Exposure lock Exposure lock/adjustmentManual focus Adjusting the FocusTemporary focus override Close the menu Using AE ShiftAdjusting Camera Sharpness Adjusting Color Phase Using the Zebra Pattern To set the white balance manually Adjusting the White BalanceSetting the white balance Using the Full Range of Features Displaying Data Code Date/Time Searching the Tape Photo Search/Date Search Returning to a Pre-Marked Position Connect the camera to the VCR Setting the camera to control your VCRDubbing Function Preparing for DubbingSetting Recorder Using the Dubbing Function for the First TimePreparations & setting up Recorder Press e on the body of the camera Make sure you are in DUB Mode see pDubbing to a VCR Adjust the setting Cut-In and Cut-Out AdjustmentsSetting the Cut-In and Cut-Out Adjustments Open the REC.SET UP menu and point the arrow at CUT-IN ADJBasic editing Simple Editing to a VCRPreparations Prepare the TV and VCRDV terminal/connections Copyright signalDubbing with Digital Video Equipment Connect the camera to the VCR, TV or other camcorder Recording from a VCR, TV or Other Camcorder Analog Line-inRepeat steps 1 to 5 until your edited recording is complete Press the pause buttonPlayback tape Recording Over Existing Scenes A/V Insert EditingTape in the camera Press the stop button of the VCR Press the A/V Insert button on the wireless controllerTo connect the external microphone Audio DubbingTo connect other audio equipment Press Audio DUB. on the wireless controller Attach the shoulder strap Adjust the viewfinderAdjust the grip belt Preparing the CameraCharging and recording times How much power is left?Remaining time indicator When to rechargeStoring the battery pack Taking care of the battery packCharging the backup battery Keep the terminals cleanTreat the battery pack with care Set the camera to VCR mode Choose the output Setting the Audio MixSelecting audio output channels Low-angle recording Camera Holding StylesChoose the grip Standard holding styleStorage MaintenanceUsing the camera abroad MaintenanceWhat you should do What happens when condensation is detectedCondensation Protecting the camera from condensation? The start/stop button doesn’t work TroubleshootingRecording/Playback ? The camera turned itself offRecording/Playback Contd About the CCD MiscellaneousAbout the LCD Viewfinder Turning off the LCD screen displays Screen DisplaysTurned on p Manua L Recording reminder Time CodeBP-915 Battery Pack Specifications100 Index101 Canon U.S.A., Inc Canon GL1 Digital Video Camcorder Limited WarrantyCanada Canon INC