Canon LEGRIA FS200 Basic Playback, Playing Back the Video, Set the camera mode dial to or Press

Basic Playback

Playing Back the Video

( 23)

1Set the camera mode dial to or .

2Press .

•Even if the camcorder is off,

pressing will turn on the camcorder in playback mode.

•The original movies index screen appears after a few seconds.

3Move (, ) the selection frame to the scene you want to play back.

Push the joystick () to extend the

selection frame and browse ( ) through whole index pages. Push the

joystick () to return to the index screen.

4 Press / or	to begin the
playback.

•Playback will start from the scene selected and continue until the end of the last scene recorded.

•Press / again to pause the playback.

•Press to stop the playback and return to the index screen.

ADJUSTING THE VOLUME

1Push the joystick ( ) to display the joystick guide.

2Push the joystick ( ) to select the top row.

3Adjust ( ) the volume.

To turn off the volume, keep the

joystick pressed ( ) toward until the volume bars disappear.

IMPORTANT

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the operating mode.

•You may not be able to play back with another device the movies you recorded on the memory card with this camcorder. In such case, play back the

35