Canon LEGRIA FS21 Print Orders, Printing multiple photos on the same sheet 2-UP, 4-UP, etc

PRINT ERRORS

If an error occurs while printing, an error message, for example [NO PAPER], will appear on the camcorder. Solve the problem referring to the error message list ( 100) and to the printer’s instruction manual.

•Canon’s PictBridge-compatible printers: If printing does not resume automatically

after you solved the problem, select

[CONTINUE] and press to resume printing. If that option is not available,

select [STOP] and press and then restart printing from the beginning.

•Other printers or if the error still persists with a Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder. After a short while, turn on the camcorder and restore the USB connection.

IMPORTANT

changed or that were recorded, created, edited or changed with any device other than this camcorder.

•If [BUSY] does not disappear, disconnect the USB cable and restore the connection after a short while.

Print Orders

You can mark in advance the photos you want to print and set the desired number of copies as a print order. Later, you can easily print out the print orders by connecting the camcorder to a PictBridge-compatible printer ( 66). You can set print orders for up to 998 photos.

( 23)

•You may not be able to print correctly with a PictBridge-compatible printer photos whose file names have been

Printing multiple photos on the same sheet [2-UP], [4-UP], etc.

When using Canon printers you can print the same photo multiple times on the same sheet of paper. Use the following table as a guideline for the recommended number of copies depending on the [ PAPER SIZE] setting.

[ PAPER SIZE]	[CREDITCARD]	[9 x 13 cm]	[10 x 14.8 cm]	[A4]
Canon printer
Inkjet printers	–	–	2, 4, 9 or 161	4
SELPHY DS
SELPHY CP/ES	2, 4 or 82	2 or 4	2 or 4	–

1You can also use the special sticker sheets.

2With the [8-UP] setting, you can also use the special sticker sheets (SELPHY CP printers only).

SELPHY CP: When you use the wide-sized photo paper with the [DEFAULT] setting, you can also use [2-UP] or [4-UP].

69