Video
Locating the End of the Last Scene
After playing back a tape, use this function to locate the end of the last scene recorded in order to continue recording from that point.
( 
19)
POINTS TO CHECK
Stop the playback before using this function.
FUNC.
( 
20)
FUNC.
[
END SEARCH] 
[EXECUTE]
•“END SEARCH” appears.
•The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops the tape.
•To cancel the end search push the joystick ( 
) toward 
.
NOTES
•End search cannot be used once you remove the cassette.
•If there are blank sections between recordings, the end search may not work correctly.
•
You cannot use the end search to locate the end of a scene that was audio dubbed.
On-Screen Displays (Data Code)
The camcorder keeps a data code containing the date and time of recording. You can select the data to be displayed.
| ( | 19) |
Options | Default value | |
[ | OFF] |
|
No data code display.
[ 
DATE], [ 
TIME]
Displays the date or time when the scene was recorded.
[ 
DATE & TIME]
Displays both the date and time of the recording.
FUNC.
( 
20)
FUNC.
[
MENU] 
[
DISPLAY SETUP/ 
] 
[DATA CODE] 
Desired option 
FUNC.
34