Rogue Audio Tempest Vacuum Tube Integrated Amplifier owner manual

Page 4

2)Remove Shipping Pallet - The amplifier is attached to a pallet that supports the main chassis during shipping. This is critical to ensure that no damage occurs in transit. After removing the amplifier from the box and packing material, CAREFULLY turn the unit upon its side. Remove the 4 thumbscrews and washers. Retain these screws and pallet in the event that the unit ever needs servicing.

WARNING : Shipping this unit without correctly attaching the shipping pallet can result in serious structural damage to the unit.

3)Remove the Top Cover - Using a phillips head screwdriver, remove the top cover of the amplifier chassis.

WARNING - If the unit has been powered up, you must turn off the power at the switch and wait at least one hour before disconnecting the electrical cord. After doing so, the unit may be unplugged and the top cover removed. This time is required for dangerous voltages to dissipate.

Rogue Tempest Owners Manual

2

Image 4
Contents Vacuum Tube Amplifiers Table of Contents Setting UP Your Amplifier IntroductionPage KT88 12AU7 12AX7 Ultra-Linear Ohm Binding Wire Feedback Post Using AN External Preamplifier External Operating Your Tempest Maintenance Replace Tubes byIf There is a Problem If Sound is not Present or is only in ONE ChannelAdding a Rogue EIGHTY-EIGHT Power AMP Owner and Warranty Registration FormSpecifications THDLimited Warranty Warranty PeriodRogue Audio Inc Avery Road Slatington, PA