Rogue Audio Vacuum Tube Preamplifier Introduction, Unpacking the Perseus Power Preamplifier

Page 3

INTRODUCTION

Congratulations on your purchase decision! We at Rogue Audio truly believe that our preamplifiers provide the “smartest” value in high-end audio. If you have never owned a vacuum tube preamplifier you will be thrilled by the silky-smooth sound and incredible detail that only a tube preamplifier can provide. And with the Perseus preamplifier, you can be sure that you are getting the very best in tube amplification. We at Rogue Audio are extremely proud of our products and want you to enjoy them to their fullest potential. So please, take the time to read through this short manual so that you can be confident that you have set up your preamplifier properly.

UNPACKING THE PERSEUS POWER PREAMPLIFIER

Tools required: none

WARNING - This preamplifier uses voltages that could cause injury or death. Never open the preamplifier while it is plugged in, and always wait at least one hour after turning the unit off to unplug and open the unit. Lethal voltages can remain in the electronics after the unit is unplugged.

The Perseus preamplifier has been painstakingly inspected for cosmetic flaws during and after assembly. In order not to damage the cosmetic appearance of your preamplifier it is important that you follow the unpacking instructions carefully.

1.Remove the small corrugated tube containing the power cord, and remote.

2.Carefully lift the preamplifier out of the box, and remove the foam pads and plastic bag.

3.The Perseus can be used either with or without the tube cage. To remove the tube cage, first unscrew 10 cover screws. Lift the cover off, and remove the 4 nuts holding the tube cage in place. Replace the cover prior to use.

4.Save the packing materials. The packing materials and box have been carefully designed to protect your valuable equipment during shipping so you don’t want to throw them away.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Perseus Table of Contents Unpacking the Perseus Power Preamplifier IntroductionTools required none Connecting the Perseus to two channel sources Installing the Perseus Into Your SystemConnecting the Perseus to a turntable Connecting the Perseus to multi channel sourcesConnecting the Perseus to an amplifier Connecting the Perseus to power outletOperation of the Preamplifier Switch ParameterPowering up the System Preamplifier LocationTroubleshooting Switches and ControlsSpecifications Owner and Warranty Registration FormLimited Warranty

Vacuum Tube Preamplifier specifications

Rogue Audio has long been a respected name in the realm of high-fidelity audio equipment, and their vacuum tube preamplifier exemplifies the company's commitment to delivering exceptional sound quality and performance. The Rogue Audio vacuum tube preamplifier is designed to enhance the audio experience, providing warmth and richness to music that only analog technologies can offer.

One of the standout features of this preamp is its use of high-quality vacuum tubes, which are known for their ability to produce a more organic and lush sound compared to their solid-state counterparts. The preamplifier typically employs matched pairs of 12AX7 or 12AU7 tubes, which contribute to a natural harmonic balance and a smooth tonal response. This results in a sound profile that is engaging, allowing listeners to experience music as it was intended to be heard.

The preamplifier often showcases full dual-mono architecture, which ensures that each channel operates independently, providing better imaging and separation of audio signals. This design minimizes crosstalk and enhances the overall soundstage, allowing listeners to immerse themselves in their favorite recordings. Additionally, the heavy-duty construction of the chassis helps to reduce vibration and external interference, further preserving audio integrity.

Rogue Audio's preamplifier typically features multiple inputs and outputs, including options for both RCA and balanced XLR connections. This versatility allows the unit to integrate seamlessly with a variety of audio sources, from turntables to high-performance digital players. Many models also include a dedicated phono stage, making them optimal for vinyl enthusiasts who appreciate the depth and detail that analog records can provide.

In terms of user experience, Rogue Audio preamplifiers often incorporate a remote control for convenience, allowing users to adjust settings from a distance. The elegant design, characterized by premium materials and a refined aesthetic, ensures that the preamplifier will complement any audio setup.

Overall, the Rogue Audio vacuum tube preamplifier represents a harmonious blend of vintage charm and modern technology. With its exceptional sound quality, versatile connectivity options, and thoughtful design features, it stands as a compelling choice for audiophiles who seek to elevate their listening experience. Whether paired with a high-end amplifier or a modest audio system, the Rogue Audio vacuum tube preamplifier is sure to deliver a rich, immersive sound that will captivate any listener.
Top Page Image Contents