Rogue Audio Vacuum Tube Preamplifier owner manual Switches and Controls, Troubleshooting

Page 7

Switches and Controls:

The Perseus is equipped with volume, balance, source, power, mute, bypass, and a remote volume.

•Volume – adjust gain from 0 to XXX dB

•Balance - full left and right channel attenuation

•Source – selects source material (PHONO, CD, TUNER, and AUX)

•Power – on/off operation

•Mute - leaves preamplifier on while muting output.

•Bypass – As explained in the Installation Section, the Bypass switch routs the HT IN input directly to the outputs, effectively bypassing the preamp.

•Remote Volume Control – The Perseus is equipped with an analog remote volume control feature. The volume may be adjusted manually using the knob on the front panel, or by using the remote control provided.

TROUBLESHOOTING

Speaker Hum

•If hum can be heard from more than a few inches from the loudspeaker, there is probably a ground loop. Be sure to have the amp and all sources plugged into the same outlet if possible. If this fails to cure the hum, call customer service at Rogue Audio for further advice.

Unit does not turn on

•Check that the power cord connection is secure

Unit does not play

•Ensure that the interconnects are connected to the proper input or output.

•Ensure that the interconnects are connected securely.

One channel does not play

•Ensure that the balance pot is centered.

•Ensure that the tubes are seated correctly and securely

For further problems, please call Rogue Audio Technical Support at 570-992-9901.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Perseus Table of Contents Introduction Unpacking the Perseus Power PreamplifierTools required none Connecting the Perseus to two channel sources Installing the Perseus Into Your SystemConnecting the Perseus to a turntable Connecting the Perseus to multi channel sourcesConnecting the Perseus to an amplifier Connecting the Perseus to power outletOperation of the Preamplifier Switch ParameterPowering up the System Preamplifier LocationTroubleshooting Switches and ControlsSpecifications Owner and Warranty Registration FormLimited Warranty

Vacuum Tube Preamplifier specifications

Rogue Audio has long been a respected name in the realm of high-fidelity audio equipment, and their vacuum tube preamplifier exemplifies the company's commitment to delivering exceptional sound quality and performance. The Rogue Audio vacuum tube preamplifier is designed to enhance the audio experience, providing warmth and richness to music that only analog technologies can offer.

One of the standout features of this preamp is its use of high-quality vacuum tubes, which are known for their ability to produce a more organic and lush sound compared to their solid-state counterparts. The preamplifier typically employs matched pairs of 12AX7 or 12AU7 tubes, which contribute to a natural harmonic balance and a smooth tonal response. This results in a sound profile that is engaging, allowing listeners to experience music as it was intended to be heard.

The preamplifier often showcases full dual-mono architecture, which ensures that each channel operates independently, providing better imaging and separation of audio signals. This design minimizes crosstalk and enhances the overall soundstage, allowing listeners to immerse themselves in their favorite recordings. Additionally, the heavy-duty construction of the chassis helps to reduce vibration and external interference, further preserving audio integrity.

Rogue Audio's preamplifier typically features multiple inputs and outputs, including options for both RCA and balanced XLR connections. This versatility allows the unit to integrate seamlessly with a variety of audio sources, from turntables to high-performance digital players. Many models also include a dedicated phono stage, making them optimal for vinyl enthusiasts who appreciate the depth and detail that analog records can provide.

In terms of user experience, Rogue Audio preamplifiers often incorporate a remote control for convenience, allowing users to adjust settings from a distance. The elegant design, characterized by premium materials and a refined aesthetic, ensures that the preamplifier will complement any audio setup.

Overall, the Rogue Audio vacuum tube preamplifier represents a harmonious blend of vintage charm and modern technology. With its exceptional sound quality, versatile connectivity options, and thoughtful design features, it stands as a compelling choice for audiophiles who seek to elevate their listening experience. Whether paired with a high-end amplifier or a modest audio system, the Rogue Audio vacuum tube preamplifier is sure to deliver a rich, immersive sound that will captivate any listener.
Top Page Image Contents