HITACHI MODEL 42PD6000TA
TROUBLESHOOTING (continued)
Actions to Correct Abnormal Displays
Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. (only for PC RGB)
Symptom 1 | Text displayed across the screen appears vertically streaked, with some characters blurred (Figure 1). | |
(PC RGB input). | ||
| ||
| Figure 1 | |
Example |
|
| 1) | Press the MENU button. The Main Menu will be displayed. | |
| 2) | Press the ▼ button and select “IMAGE”. | |
| 3) | Press the ENTER button. The “IMAGE” Menu will be displayed. | |
| 4) | Press the ▼ button and select “Auto Adjust”. | |
| When adjustment is not possible with Auto Adjust | ||
Adjustment | 5) | Press the MENU button. The Main Menu will be displayed. | |
6) | Press the ▼ button and select “IMAGE”. | ||
Procedure | |||
7) | Press the ENTER button. The Setup Menu will be displayed. | ||
| |||
| 8) | Press the ▼ button and select “Horizontal Clock”. | |
| (Display fine patterns as characters or a vertical striped pattern over the entire screen during Horizontal Clock | ||
| adjustment.) | ||
9)Press the W or X buttons and search for clear characters over the entire screen.
10)Perform adjustment for symptom 2 below, when the characters are blurred on the entire screen.
•The display image may be momentarily disturbed during clock adjustment but this is not a failure.
ENGLISH
Symptom 2 | Text displayed across the screen appears blurred in its entirety (Figure 2). | ||
A fine pattern flickers when displayed on the screen (Figure 3). | |||
| |||
| Figure 2 | Figure 3 | |
Example
1)Press the MENU button. The Main Menu will be displayed.
2)Press the ▼ button and select “IMAGE”.
3)Press the ENTER button. The Setup Menu will be displayed.
4)Press the ▼ button and select “Auto Adjust”.
Adjustment | When adjustment is not possible with Auto Adjust |
| |
5) Press the MENU button. The Main Menu will be displayed. | |||
procedure | 6) | Press the ▼ button and select “IMAGE”. |
|
| 7) | Press the ENTER button. The Setup Menu will be displayed. | |
| 8) | Press the ▼ button and select “Clock Phase”. |
|
| (Display fine patterns as characters or a vertical striped pattern over the entire screen during Clock Phase adjustment.) | ||
| 9) | Press W or X buttons to make the text appear clean | 9) Press W or X buttons to make the text appear without |
|
| across the screen. | flickering. |
39
