HITACHI MODEL 42PD6000TA
OTHER FUNCTIONS
Audio Switching | 1 |
ABCDE | |
| ▼ |
A2 / NICAM / Sound Multiplex (TV mode)
•The I/II button in remote control is useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears as shown on right. Press the I/II button to select the sound to be heard.
Each time the button is pressed, ［I］Language A, ［II］Language B, ［I/II］Language A/B or ▼ Mono appear cyclically on the screen. When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received Yellow |
| Yellow |
| Yellow |
| Green | |||||
|
|
|
|
|
|
|
|
|
|
|
|
| ［I］ | ［II］ | ［I/II］ | ▼ | |||||||
NICAM signal received | Yellow | Yellow | Yellow | Green |
NICAM［I］
NICAM［II］
NICAM［I/II］
NICAM ▼
STEREO sound broadcast
When a stereo program is received, sound mode display will appear, and you can press the I/II button to select between stereo and mono sound.
Each time the button is pressed, ▼ Mono or 
Stereo appear cyclically on the screen. When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received
GreenRed
▼
NICAM signal received | Indicatin | Red |
|
|
NICAM ▼
NICAM 
Monaural sound broadcast
When a monaural program is received, sound mode display will appear.
NOTE
•If sound signal is not strong enough for quality reception, press the I/II button until ▼ appears on the screen to receive a clear mono sound.
•If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the I/II button until
▼appears on the screen to receive a clear mono sound.
34
