Panasonic HX-WA20, HX-DC2 Using direct mode, Selecting files to transfer, 167, # Transfer/Protect

∫Using direct mode

The files can be transferred directly from the Eye-Fi card to a smartphone or tablet without going through the access point when necessary setting is performed in a PC in advance.

≥Install the software supplied with the Eye-Fi card on your PC, and configure the direct mode settings.

Select the menu.

[MENU]: 3

#[Eye-Fi] # [START DIRECT MODE]

≥If any of the following operations is performed, the direct mode will be cancelled.

jIf you turn the unit off

jClosing the LCD monitor, sending the unit into standby mode. jStarting motion picture or audio recording

The direct mode may be cancelled by the Eye-Fi card for reasons other than the above.

≥In direct mode, the economy mode function (l 39) is disabled.

≥When [TRANSFER] (l 166) is set to [OFF], [START DIRECT MODE] cannot be selected.

∫Selecting files to transfer

If you perform the required settings in advance on your PC, you can transfer selected files alone. For settings methods etc., please read the card operating instructions or consult the card manufacturer.

≥Install the software supplied with the Eye-Fi card on your PC, and configure the selection transfer settings.

Select the menu.

[MENU]:

1# [TRANSFER/PROTECT]

≥The settings method is the same as for the protect settings. (l 129)

≥For the files set for selected transfer, is displayed on the thumbnail screen (1-file display).

≥If you have not performed selected transfer settings on your PC, [PROTECT] is displayed and the selection transfer setting is disabled.

- 167 -