Panasonic HX-DC2, HX-WA20 operating instructions 123

2 Select the menu.

[MENU]:

2 # [EDIT VIDEO] # [ (SPLIT)]

3 Specify the starting position for the scene.

≥Play back to near the position where you

wish the scene to start, then pause playback and specify the starting position

precisely using frame-by-frame playback.

The pause position will be the starting position of the scene.

≥If you wish the split scene to start from the beginning of the scene, go

to Step 4.

Operations

Play back	With the unit paused, tilt the SET button to the
	right for approximately 2 seconds to play back
	normally, and to the left to play back in the
	reverse direction.
Pause	During playback, press the SET button.
Fast forward/	During playback, you can change the playback
rewind	speed by tilting the SET button right or left.
Frame-by-frame	With the unit paused, tilt the SET button to the
	right to advance frame-by-frame, and to the left
	to reverse frame-by-frame.

4Tilt the SET button up.

5Specify the end position for the scene.

≥The screen for specifying the end position of the scene appears.

≥Set the end position by performing the same operations as when setting the start position.

≥The portions displayed in green are saved.

≥If you wish to splice a preceding section to

a subsequent section, tilt the SET button down. Each downward tilt of the SET button changes the section to be deleted.

6 Press the button or the recording start/stop button.

- 123 -