91
What to Do if the “ImageBrowser not found” Dialog Appears
If you install only the Canon Digital Camera
1.Click the [OK] button on the “ImageBrowser not found” dialog.
2.In the “Settings for USB connection” dialog, click the [The application program below will start.] option to clear the check mark.
3.Close the “Settings for USB connection” dialog.
This will prevent the “ImageBrowser not found” dialog from appearing again when the camera is connected.
•The “Settings for USB connection” dialog can be opened by choosing the Apple
menu 
and selecting [Control Panels] and [Canon USB Camera]. (➜ p. 66)
Click here to close the dialog.
Click here to clear the check mark.
Connecting via a CF Card Reader or PC Card Slot
1.Place the CF card into the CF card reader or into the PC card adapter and then into the PC card slot.
Refer to Where to Find Instructions for Attaching Your Camera to a Computer (➜ p. ii) for connection instructions.
2.Start Adobe Photoshop LE.
Serial Interface
About AppleTalk
When connected to the printer or modem port via AppleTalk, choose the Apple menu 
, select [Chooser] and set AppleTalk to [Inactive].
1.Connect the camera to the computer with the serial cable.
Refer to Where to Find Instructions for Attaching Your Camera to a Computer (➜ p. ii) for connection instructions.
2.Set the camera to the mode for communicating with a computer.