Stitch Assist Mode
64
4.Orient the camera so that the second frame overlaps a small portion of the photographic subject of the first image and press the shutter button to take the next image.
After the indicator stops flashing green, the second recorded image will display beside a preview of the new photographic subject captured by the lens.
•To retake the previous image in the sequence, press the + button before shooting the next image. The previously recorded image will be replaced by a preview of the new photographic subject captured by the lens.
5.Follow the same steps to shoot subsequent images in the sequence.
•Do not worry about minor discrepancies in the overlapped areas because the computer software can compensate for them when the images are merged.
•You can check through a sequence by repeatedly pressing the + button. Release the button to retake the previous image.
•A maximum of 26 frames may be shot in any horizontal or vertical sequence.
6.Finish the sequence by pressing the SET button after the last image has been recorded.
•The respective icons will display on the LCD panel when the Exposure Compen- sation, White Balance and Slow Shutter settings are set to values other than their default settings.