Appendices
Troubleshooting
Problem | Cause(s) | Solution(s) |
|
Camera will not operate | Battery cover lock not in lock | • Slide the battery cover lock into the | |
| position | locked position. |
|
|
|
| |
| 2CR5 lithium battery is inserted | • Install the 2CR5 lithium battery with the | |
| the wrong way | terminals oriented toward the back of | |
|
| the chamber. |
|
|
|
| |
| Insufficient battery power | • Use a fully charged battery pack. | |
| (Display panel flashes [Lb]) | • Replace the battery. |
|
|
| • Use an approved AC power source. | |
|
|
| |
| Incorrect battery type | • Use the specified battery pack or lithium | |
|
| battery. |
|
|
|
| |
| Poor contact between battery | • Wipe the battery terminals with a clean, | |
| and camera terminals | dry cloth. |
|
|
|
| |
Camera will not shoot | Mode Dial is set to the L (Lock) | • Turn the Mode Dial to any one of the | |
| position | (Auto), P (Program) or | (Stitch Assist) |
|
| mode positions. |
|
Flash is charging ( icon flashes)
•Wait to press the shutter button until the
flash charges, the icon changes from flashing to a steady light and the indicator shines red.
96