Taking Pictures in Stitch Assist Mode continued....4/6
graphic subject captured by the lens.
•To retake the previous image in the sequence, press the + Button before shooting the next image. The previously recorded image will be replaced by a preview of the new photographic subject captured by the lens.
5.Follow the same steps to shoot subse- quent images in the sequence.
•Do not worry about minor discrepancies in the overlapped areas because the computer software can compensate for them when the images are merged.
•You can check through a sequence by repeatedly pressing the + Button. Release the button to retake the previous image.
•A maximum of 26 frames may be shot in any horizontal or vertical sequence.
6.Finish the sequence by pressing the SET Button after the last image has been recorded.
2x2 Shot Procedures
1.Turn the Mode Dial to the 
(Stitch Assist) position.
2.Select [2x2] with the +/- Buttons and press the SET Button.
•By default, images are recorded in a clockwise direction starting from the upper right. To change the starting position, press the + Button before taking the first shot.
39