•The battery pack continues to discharge a minimal portion of its power while installed in the camera, even with the camera power off. This will shorten the battery life. Remove it from the camera during extended periods of disuse. Place it into the case provided and store it in a cool, dry place. Be sure to charge it fully before using it after a period of extended storage.
•Repeated recharging before the charge is completely discharged may diminish the charge capacity. Completely discharge and fully charge the battery pack several times to restore its capacity.
•If the time over which the battery pack can be used diminishes substantially even when it is fully charged, the battery pack should be replaced.
Installing the Battery
Install the 2CR5 lithium battery or the rechargeable Battery Pack
1 Turn the Mode Dial to the 
position.
2Slide the battery cover lock in the direction of the arrow and open the battery cover.
3Install the battery as shown in the diagram.
|
|
|
|
|
| Battery |
|
|
|
|
|
| |
2CR5 |
|
| Battery Terminals |
|
| Pack |
|
|
|
| |||
|
|
|
| |||
Lithium |
|
|
|
| ||
|
|
|
|
| ||
Battery
Preparing the Camera
17