Listening to the radio (continued)
■To preset a station
You can store 40 FM stations in memory and recall them at the push of a button. (Preset tuning)
1Perform steps 2 - 3 in “Tuning”.
2Press the MEMORY button.
3Within 5 seconds, press the PRESET/FOLDER ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1.
4Press the MEMORY button to store that station in memory. If the “MEM” and preset number indicators disappear before the station is memorised, repeat the operation from step 2.
Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorised for that preset channel number will be erased.
Note:
●During listening to the radio, press DISPLAY button to display PRESET number.
●The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead become disconnected.
■To recall a preset station
Press the PRESET/FOLDER ( or ) button to select the desired station.
■To scan the preset stations
The stations saved in the memory can be scanned auto- matically. (Preset memory scan)
1Press and hold the PRESET/FOLDER ( or ) button. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.
2Press the PRESET/FOLDER ( or ) button again when the desired station is located.
■To erase entire preset memory
1Press and hold the CLEAR button until “CLr” appears.