Listening to USB mass storage device/MP3 player
Note:
This product is not compatible with MTP and AAC file systems.
■To play back USB/MP3 player
1
The following functions are the same as CD opera- tion:
●Direct search
●Repeat play
●Random play
●Playback
●Programmed play
Note:
If the USB memory device is not connected, “no” will be shown on the display.
■To remove USB memory device 1 Press the 
button to stop playback.
2Press the 
button again and wait until display “Un” stops blinking.
3Disconnect the USB memory device from the USB terminal.
Notes:
●SHARP will not be held liable for the loss of data while the USB memory device is connected to the audio system.
●This USB memory’s format supports FAT 16 or FAT 32.
●SHARP cannot guarantee that all USB memory devices will work on this audio system.
●USB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system.
2Select desired file to be played back by pressing the 
or 
button.
3Press the 
button. Playback will start.
●During playback, press DISPLAY button to display the folder, then track number. It will appear for about 2 seconds.
Note:
To pause playback:
Press the 
button.