Key Digital KD-DA6, KD-CDA12 user manual Have No Audio

Page 12

HD View 6 Model KD-DA6

OPERATING INSTRUCTIONS

compatible with the “Display” device. Make sure that the “Source” signal is of a valid format that can be displayed by the connected “Display” device; for example: if the “Display” device connected is not capable of handling HDTV compatible video signals make sure that the “Source” device is set to output SD (Standard definition or 480i) compatible signals.

I have a picture but there is noise or “hum bars” visible in the image.

This could happen when crossing power lines when routing the cable from the “Source” device to the KD- DA6 or KD-CDA12, or when routing the cables from the KD-DA6 or KD-CDA12 to the “Display” device. If crossing power lines is inevitable, make sure to use heavy shielded good quality cable like Key Digital techFlex heavy gauge AV cable (refer to main catalog for cable selections, or Key Digital’s interactive web- site: www.keydigital.com

Sometimes using a shielded and noise filtering surge oritector can eliminate noise in power lines.

I have No Audio.

When connecting the Left and Right (White and Red connector) stereo audio channel make sure that the connectors are properly connected to the “Source” device as well as the “Display” device.

Make sure that the volume is turned up to an audible level on the “Source” device as well as the “Display” device.

Page 12

Image 12
Contents HD View12 Model KD-DA6UL Listedoperating Instructions Introduction Product Hookup When running long lengths of cable please make Additional installation notes specific to the KD- CDA12 Please refer to the illustration for 2X6 termination mode SW2 on OFF on on on OFF OFF onDipswitches on the unit should be set to the fol Lowing SW2 OFF on OFF OFF OFF on OFF OFFSW2 OFF on on OFF on on OFF on Please refer to the illustration for NX12 Daisy ChainTroubleshooting No power to the unitThere is no signal displayed on the Display device This happens when the input signal is not is notHave No Audio KEY Benefits for KD-DA6 & KD-CDA12 Years parts and labor warranty Warranty Technical Specification for KD-DA6 & KD-CDA12 InputCable Recommendation Each run of YprPb cable Must be the same length 300’ maxApril