Key Digital KD-DA6, KD-CDA12 user manual April

Page 16

HD View 6 & 12Model KD-DA6 & KD-CDA12

OPERATING INSTRUCTIONS

The unit may be oriented horizontally, or mounted vertically on a wall. Use 2 #8 or M4 screws to hang the unit (keyhole slots are provided on the base of the unit). If installing into sheet-rock or hollow walls, provide proper screw support with bolts or sheet-rock anchors.

Warranty: 2 years parts and labor.

Warranty:

All Key Digital products are backed by a limit two year parts and labor warranty. For warranty infor- mation or RMA (Return Authorization instructions) please contact Michael@keydigital.com or call (718)796-7178, ext. 10.

Key Digital Inc.

128 E. Liberty Street

Danbury, CT 06810

Tel. 718 796-7178

Tech & Customer Suppor Tel . 888 258-2028

April 2004

Image 16
Contents HD View12 Model KD-DA6UL Listedoperating Instructions Introduction Product Hookup When running long lengths of cable please make Additional installation notes specific to the KD- CDA12 Please refer to the illustration for 2X6 termination mode SW2 on OFF on on on OFF OFF onDipswitches on the unit should be set to the fol Lowing SW2 OFF on OFF OFF OFF on OFF OFFSW2 OFF on on OFF on on OFF on Please refer to the illustration for NX12 Daisy ChainTroubleshooting No power to the unitThere is no signal displayed on the Display device This happens when the input signal is not is notHave No Audio KEY Benefits for KD-DA6 & KD-CDA12 Years parts and labor warranty Warranty Technical Specification for KD-DA6 & KD-CDA12 InputCable Recommendation Each run of YprPb cable Must be the same length 300’ maxApril