SW2 OFF on OFF OFF OFF on OFF OFF

HD View 6 Model KD-DA6

OPERATING INSTRUCTIONS

inputs is for receiving the Source or input signal; the other input is used for the “Loop-Through” signal, for passing the signal to the next amplifier in the chain of series. Either input can be used as the “Source” input or as the “Loop-Through” input (to send the sig- nal to the next KD-CDA12 or KD-DA6.) The Mode 2 setting is used for all KD_CDA12 in the chain except for the last unit which must be set to Mode 3 (See below for appropriate dip switch setting). A maxi- mum of 4 KD-CDA12’s can be connected in a “Daisy Chain” using this hook-up method.

The dipswitches on the unit should be set to the fol-

lowing:
_1		2	3	4	_5	_6	7	8
SW1	OFF	ON	OFF	OFF	ON	ON	OFF	OFF

_________________________________________________________________________________________________

*Please refer to the illustration for NX12 Daisy Chain.*

Mode3: The KD-CDA12 can can be configured to dis- tribute 1 input “Source” to 12 different “Display” devices.

The dipswitches on the unit should be set to the fol- lowing:

Page 8