Functions Available with Memory Load/Save

Functions Available with Memory Load/Save

Category	Data	Initial values

Gain	AGC ON/OFF	ON

	AGC Max Gain	18dB

	Step Gain	0dB

Shutter speed	Shutter OFF/CCD Iris/	OFF
	Variable

	Shutter speed	NTSC:1/60 PAL:1/50

	CCD Iris Max Speed	1/4000

Exposure	Exposure Compensation	80h : Normal Status

	AE speed	normal

White Balance	WB mode AWB/ATW/	3200K
	manual/3200K/5600K

	ATW speed	normal

	Manual R-gain	80h : Normal Status

	Manual B-gain	80h : Normal Status

	AWB R-gain1)	–
	AWB B-gain1)	–
Video Process	Pedestal	80h : Normal Status

	Sharpness	80h : Normal Status

	Gamma ON/OFF	ON

	Nega ON/OFF	OFF

	Output VBS/YC	VBS

	VS H-phase	80h : Normal Status

	HD/VD H-phase	80h : Normal Status

1)AWB R,B-gain retains the results of the last One Push AWB operation. If “Memory Load” is carried out when WB mode is set to AWB, the AWB R, B- gain results held in memory are activated.

RS-232C Command List

The Memory Bank to be Activated When Power is Turned on

When the RS-232C switches are set to

OFF

The “Factory” settings are activated. The AGC, Shutter, WB, and VBS/YC settings made using the DIP switches on the side of the camera or made using R/B adjustment volume are given priority.

When the RS-232C switches are set to ON

The settings in the Memory Bank (Factory/A/B) selected in the last Memory Load operation are activated.

If started using “Factory,” immediately after the power is turned on, the AGC, Shutter, W.Balance, and VBS/ YC settings made using the DIP switches on the side of the camera or made using R/B adjustment volume are given priority. After that, if the camera enters RS- 232C mode, and “Memory Load Factory” is carried out, settings made using the DIP switches on the side of the camera or made using R/B adjustment volume are disabled, and the initial values shown in “Functions Available with Memory Load/Save” on the previous column are activated.