Sony XC-555P technical manual Location of Parts and Operation, Dip switches for setting functions

Page 5

Overview

Location of Parts and Operation

1

2

3

5

4

1Dip switches for setting functions

This switches are used to adjust white balance and shutter speed; and to flip AGC (ON/OFF) and output signals (Y/C/VBS).

For details, see “Mode Setting” on page 6.

2R control for manual white balance adjustment This control is effective when the white balance switches are set to MAN. Adjust the red color by turning the control.

3B control for manual white balance adjustment This control is effective when the white balance switches are set to MAN. Adjust the blue color by turning the control.

4Lens mount (special mount)

5DC IN/SYNC/VIDEO connector (multi 12-pin)This connector inputs DC 12V power and outputs the video signal when the CCXC-12P02N/12P05N/ 12P10N/12P25N camera cable is connected.

If the unit is connected to devices that originate a synchronized signal, the external synchronous signal (VS, HD/VD) can be used to move the color camera module.

5

Image 5

Contents CCD Color Video Camera Module Table of Contents Main Features Connection Diagram Location of Parts and Operation Dip switches for setting functionsTo Adjust the white balance Mode SettingPin assignment of the DC IN/SYNC/VIDEO connector To adjust the shutter speed InstallationAGC Auto Gain Control ON/OFF Usable LensesTo attach a lens To install the camera on a tripodHD/VD, VS ConnectionsGenlockFunctions That can be Controlled via the RS- 232C Interface RS-232C Command ListPrecautions to be Observed When Using RS-232C Commands Setting the RS-232C SwitchesConnections Communication SpecificationsSequence from Power up to Beginning/End of Communication Shutter Settings Camera Function Setting CommandsSetting Gain White Balance Settings System Settings Video Process SettingRead Request Rmem Camera Setup Readout from a ListExamples Structure of the Memory Banks RS-232C Mode and the Memory BanksWhen the RS-232C switches are set to Memory Bank to be Activated When Power is Turned onWhen the RS-232C switches are set to on Functions Available with Memory Load/SaveXC-555 Ntsc Shutter speed Shutter Speed and the Settings Command1DB XC-555P PAL Shutter speed 039.6 Pickup device Accessories not supplied DimensionsXC-555P Spectral Sensitivity Characteristics Typical ValueXC-555 Appendix