Sony XC-555P Installation, To adjust the shutter speed, AGC Auto Gain Control ON/OFF

To adjust the shutter speed

Set the shutter speed switches to select the desired shutter speed.

Using the CCD IRIS function, set the CCD IRIS mode.

	Shutter speed	DIP switch setting
OFF	1/60 sec. (factory setting)
	(XC-555)
	1/50 sec. (factory setting)
		1	·	·	·	·	6
	(XC-555P)
1/1000	1/1000 sec.
		1	·	·	·	·	6
CCD IRIS	Set the CCD IRIS mode.
		1	·	·	·	·	6
FLICKERLESS	1/100 sec. (XC-555)
	1/120 sec. (XC-555P)
		1	·	·	·	·	6

AGC (Auto Gain Control) ON/OFF

	Gain	DIP switch setting
ON	Auto gain control
	(factory setting)
		1	·	·	·	·	6
OFF	0 dB
		1	·	·	·	·	6

Y/C/VBS

Select the camera output signal.

	Output signal	DIP switch setting
Y/C	Select this position to output
	the Y/C separated signal from
	the DC IN/VIDEO connector.	1	·	·	·	·	6
VBS	Select this position to output
	the VBS signal from the DC IN/
	VIDEO (factory setting).	1	·	·	·	·	6

Overview

Installation

Usable Lenses

•VCL-12S12XM NF mount lens (f=12mm)

•VCL-06S12XM NF mount lens (f=6mm)

•VCL-03S12XM NF mount lens (f=3.5mm)

•VCL-12SXM NF mount lens (f=12mm)

•C-mount lens for 1/2-inch CCD.

Lens mount shoulder

4.1 mm or less

Notes

•To attach a C-mount type lens, the C-mount adaptor (LO-999CMT) is required.

•This camera uses a 1/2-inch CCD. So the lens should be used with this size of CCD. If used with a lens intended for 2/3-inch CCD, the angle of view will be different.

•When connecting a heavy lens, make sure that it is supported properly.

•When connecting heavy lens, make sure that it is not subject to shocks or vibration.

7