Minolta S-100, Minolta Vectis Mode Shutter Priority, To cancel the flash, push the flash down

Page 26

S MODE - SHUTTER PRIORITY

In S mode, you select the shutter speed and the camera automatically sets the aperture required for proper exposure. Use S mode when you want to control the blur caused by subject movement.

1. Open the control-panel door.

2. Press the exposure-mode button until S appears in the data panel.

3. Turn the control dial to select the shutter speed.

• Press the program-reset button to return to fully automatic operation.

• If the aperture display in the data panel blinks, the required setting is outside the aperture range of the lens. Turn the control dial until the blinking stops.

•The number 60, or 125, displayed in the data panel stands for 1/60th or 1/125th of a second.

S Mode Flash

When the built-in flash is up, it will fire each time a picture is taken. When the built-in flash is down, it will not fire.

Press the flash-mode button to turn the flash on.

• Flash operation in the S mode is the same as P mode. The camera automatically sets the aperture and the shutter speed.

To cancel the flash, push the flash down.

48

49

Image 26

Contents Instruction Manual New processing… Advantages of the Advanced Photo System Easier to load…New print formats… Table of Contents For Proper and Safe USE Please Note Operating Temperature and ConditionsSplashproof Body Names of PartsFilm Cassette Warning Names of Parts Data Panel ViewfinderQuick Operation Attach the camera strap as Attaching the StrapShown Using the eyepiece cap, open the battery-chamber door Installing the BatteriesChecking the Battery Power Snap the battery-chamber door shutRemoving the Lens Lens Hood NoteSubject appears sharpest Diopter AdjustmentHandling the Camera Holding the CameraPush the film chamber in until it clicks shut Visual Exposure IndicatorsLoading Film Use IX240 type film in this cameraLoading Film Fully Automatic Operation Focus Hold Special Focusing SituationsFrame or when autofocus is difficult to confirm Press the shutter-releaseUsing the BUILT-IN Flash Rewinding the Film Subject Program Selection Mode OperationClose-up Mode For close-up photography Sports Mode Subject Program SelectionProgram pointer is under Portrait ModeLandscape Mode Press the program-select button until the subjectFor best results use the V Lens 50mm f/3.5 Macro CLOSE-UP ModeSports Mode Use a tripod to reduce camera shakeAppears Night Portrait ModePhotographing Night Scenes Data panel TipsShutter Speed and Aperture in the Data Display Mode Aperture PriorityCreative Exposure Modes Shutter SpeedPress the flash-mode button to turn the flash on Mode FlashTo cancel the flash, push the flash down Aperture Control Large ApertureMode Shutter Priority To cancel the flash, push the flash downShutter Speed Control Fast Shutter SpeedDATE/TIME Imprinting Sequence is as follows Press the focus-mode SELF-TIMERManual Focus Remote-control button Until appears in the data panel CONTINUOUS-DRIVE ModePress the drive-mode Place the camera on a tripod, then pressCup Focus Hold in Remote Control ModeAttaching the Eyepiece Cap Remove the eyepiece Slide the battery chamber back into the remote control Changing the BatteryPull out the battery chamber and remove the old battery Canceling the AF IlluminatorExposure Compensation Metered Exposure Over Exposure5400HS Press the flash-mode button to raise the built-in flashYour flash manual 5400xiTaking Pictures in Wireless/Remote Flash Mode Using the Optional Remote ControlPressing the program-reset PROGRAM-RESET ButtonProgram-reset button Fully-automatic operationLAB Services Lenses Accessory InformationSpecifications for the V Lens 28-56mm f/4-5.6 Lens HoodCare and Storage CleaningQuestions and Service StorageTechnical Details AF SystemBatteries are loaded TROUBLE-SHOOTINGNo display appears when Incorrectly Camera is switched on Situation is unsuitable forCamera Warnings Quick Reference Guide 9222-2102-31 P9705-A705