Minolta Minolta Vectis, S-100 instruction manual Sequence is as follows

DATE/TIME IMPRINTING

Changing the Date/Time Format

1. Open the control-panel door, then press the date button.

2. Press and hold the select button until all items in the date display blink.

3. Turn the control dial to change the display format.

4. Press the select button (or the date button) to set the chosen format.

•Follow the sequence as stated above. If the wrong button is pressed, the new format will not be entered.

•After changing the date/time format, press the shutter-release button partway down to return to the standard data-panel display.

Imprinting the Date or Time

Before taking the picture-

1.Open the control-panel door.

2. Press the date button

until the data panel displays the format you want to see on the print.

The sequence is as follows:

Date Time (No Imprinting)

• After selecting the desired date/time format, press the shutter-release button partway down to return to the standard data-panel display. If imprinting has been selected, will remain in the data panel.

•The same format will be printed on the front and the back of the print.

•If no front imprinting is selected, all the date and time information will be printed on the back of the photograph.

54 55