Jet Tools JTM-4VS operating instructions Replacement Parts, Replacement of Quill Feed Clock Spring

Page 24

Replacement of Quill Feed Clock Spring

Refer to the Spindle Assembly in the Parts section.

Disconnect electrical power to the machine before performing any maintenance.

1.Remove the coarse feed handle.

2.Remove the screw, hub, and key from the coarse feed shaft (ref. 172, 175, and 171).

3.Remove six screws (Ref. 1) and allow the clock spring (ref. 178) to slowly unwind.

4.Remove feed handle hub sleeve (ref. 176).

5.Lift the end of the spring (ref. 178) from the pin (ref. 168) on the pinion shaft (ref. 166).

6.Remove the spring (ref. 178) from the spring cover (ref. 177).

7.Install the replacement spring (ref. 178) in the spring cover (ref 177).

8.Install end of spring (ref. 178) over the pin (ref. 168) on pinion shaft (ref. 166).

9.Install pin (ref. 168) in feed handle hub sleeve (ref. 176) on other end of spring (ref. 178).

10.Turn the spring cover (ref. 177) to wind the spring (ref. 178). Turn the spring cover (ref. 177) until the desired tension is achieved. Hold the spring cover (ref. 177) in position and secure with six screws (ref. 1).

11.Install the key, hub, and screw (ref. 171, 175, and 172) onto the feed shaft (ref. 166).

Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800- 274-6848, Monday through Friday (see our website for business hours, www.jettools.com). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

24

Image 24
Contents Variable Speed Turret Mill Part No. M-690182Warranty and Service Warranty PeriodTable of Contents Page Page Introduction Specifications JTM-4VS-1690180 Contents of the Shipping Container UnpackingSet-up and Installation Preparing the Milling Machine for ServiceJTM-4VS Dimensions Installation DiagramJTM-4VS Overview and Terminology OverviewMotor Switch Electrical ConnectionsOperating Instructions Operating ControlsVariable Speed Control Change speed only while the spindle is turningQuill Power Feed Lever Spindle BrakeHigh-Neutral-Low Shift Lever Feed Rate LeverMicrometer Adjusting Nut Feed Trip Cam LeverFeed Direction Control Coarse Feed HandlePower Feed Operation Depth Scale and StopCCW Adjustments Mill Head Left/Right AdjustmentDraw Bar Operation Changing Tooling Clamping Work Piece to the TableMill Head Fore/Aft Adjustment Gib Adjustment Positioning the RamPower Feed Trip Lever Mechanism Table Lead Screw Backlash AdjustmentCross Feed Backlash Adjustment Longitudinal Backlash AdjustmentPage Maintenance Periodic Maintenance RequirementsReplacement of Drive Motor Replacement of Vari-Speed Belt Replacement of Brake Shoes, Springs and/or Timing BeltReplacement Parts Replacement of Quill Feed Clock SpringHead Assembly Parts List for Head Assembly Index No. Part No Description Size QtyJTM4VS-HA VS-054 JTM4VS-A002B Spindle Assembly Parts List for Spindle Assembly LA-082 Overload Clutch Lockout LA-083 RINS30 Base Assembly Parts List for Base Assembly JTM4VS-B79 JTM4VS-B80JTM4VS-B81 JTM4VS-B82Lead Screw Assembly LT-010BSP-CHROne-Shot Lubrication System ALMP-04-VSJTM4VS-BUTW1458 Electrical Connections Single Phase only Electrical Connections 3 Phase only New Sanford Road LaVergne, Tennessee Phone

JTM-4VS specifications

The Jet Tools JTM-4VS is a highly regarded vertical mill that caters to the demands of both professional machinists and serious hobbyists. This versatile piece of machinery combines precision engineering with innovative features, making it a popular choice in workshops and fabrication shops.

One of the standout characteristics of the JTM-4VS is its powerful 1.5 HP motor that operates on either 115V or 230V power supply, providing flexibility depending on the workshop setup. The motor offers variable speed control, from 60 to 4200 RPM, allowing users to adjust speeds according to the material being machined. This capability makes it ideal for a wide range of applications, from heavy milling on steel to delicate work on softer materials like aluminum.

The JTM-4VS is equipped with a robust cast iron column and base, which contribute to its stability and durability. This construction minimizes vibrations during operation, resulting in improved precision and surface finish on machined parts. The table measures 9” x 49”, providing ample workspace for various projects, and is fitted with T-slots for easy clamping of workpieces.

Another notable feature of the JTM-4VS is its easy-to-use digital readout (DRO) system that assists users in making precise adjustments and measurements. The DRO enhances the overall efficiency of the milling process, allowing operators to focus on the task at hand rather than relying solely on manual measurements.

The machine also incorporates a high-grade, hardened and ground bedway that ensures smooth operation and long-lasting performance. This feature not only extends the longevity of the mill but also allows for precise vertical and horizontal movements.

Safety is a primary concern in any workshop, and Jet has addressed this with various safety features integrated into the JTM-4VS. The mill is designed with a protective shield and emergency stop button, ensuring operators can work confidently.

In summary, the Jet Tools JTM-4VS stands out for its combination of robust construction, versatile functionality, and user-friendly technologies. With its powerful motor, variable speed capabilities, and precision features, it is an excellent investment for anyone looking to enhance their machining capabilities in the workshop. Whether it's for industrial applications or intricate projects, the JTM-4VS delivers reliable performance and exceptional results.