Front Panel

p a v

L U C A S F I L M

balance

vcr 1

vcr 2

laser disc tv/aux

master

center

cd 1

cd 2

tape 1

tape 2

bal/aux

tuner

rear

mute

thx

pro

main remote both record

cinema

logic

stereo

mono

off

ref. level

standby

input level delay

recall

sub

p a t h

s u r r o u n d m o d e

P R O C E E D

12 11

Viewing Simulcasts

1VIDEO SOURCE SELECTION BUTTONS

These four buttons select both the video and associated audio signals from any of the four A/V inputs. To use these Selection Buttons, choose the ap- propriate path (see path, below). (For your music/home theater room, “main” would be appropriate.) Then make your selection. The sophisticated switching system employed in the PAV allows simultaneous, independent routing of both audio and video signals along any or all of three paths: main, remote and record.

2AUDIO SOURCE SELECTION BUTTONS

These six buttons select audio signals from among the six audio-only inputs. (Note that both cd1 and bal/aux are balanced inputs which use precision XLR connectors.) To use these selection buttons, choose the ap- propriate path (see path, below), and then make your selection.

Selecting any audio source after having selected a video source will cause the newly-selected audio signal to “override” the audio portion of the video selection (leaving the video signal unaffected). Thus, to enjoy a simulcast, merely select the desired picture followed by the desired sound. To revert to the sound of the video input, just press the video input button again.

3MAIN DISPLAY

The main display provides information pertaining to the operation of the PAV including relative volume levels, and is used in conjunction with the buttons which surround it. At all volumes above a relatively quiet back- ground level, and in all modes, the volume control enjoys a resolution of 0.5 dB. Thus a change of 10 decibels would be indicated by a change of 20 in the display.