Control Elements, Front panel control elements

POWERPLAY PRO HA4600

+If the unit is damaged, please do not return it to us, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.

Be sure that there is enough space around the unit for cooling and please do not place the POWERPLAY PRO on high-temperature devices such as power amplifiers, etc. to avoid overheating.

+Before connecting the POWERPLAY PRO to the mains, please carefully check that your equipment is set to the correct supply voltage!

The fuse holder on the female mains connector has 3 triangular markings. Two of these triangles are opposite each other. The HA4600 is set to the operating voltage shown next to these markings. It can be set to another voltage by turning the fuse holder through 180°. CAUTION: this does not apply to export models, which were designed e.g. only for a mains voltage of 120 V!

Connection to the mains is made by means of a mains cable with an IEC receptacle which complies with the appropriate safety regulations.

+Please note that all units must be grounded properly. For your own safety, you should never remove any ground connectors from electrical devices or power cords or render them inoperative.

WARNING!

+It should be pointed out, that extreme output volumes may damage your ears and/or your headphones. Turn down all LEVEL controls before you switch on the unit. Always pay attention to an appropriate volume.

2. CONTROL ELEMENTS

The BEHRINGER POWERPLAY PRO has four identical channels. Each channel has three illuminated push-button switches, four rotary controls, two jacks and eight LEDs. The common main section has one control, one jack and five LEDs.

2.1 The front panel control elements

Fig. 2.1: The POWERPLAY PRO front panel

The DIRECT IN socket is used to apply external signal sources. Use of this input automatically cuts off the MAIN signal applied on the rear panel.

The INPUT LEVEL control adjusts the sound level of the input signal, which is fed in via the rear panel MAIN INPUT socket.

6	1. INTRODUCTION

HA4600 specifications

The Hanns.G HA4600 is an impressive monitor designed for both professional and casual users who demand high-quality display performance. This model is particularly popular in workplaces, gaming setups, and for multimedia applications, balancing functionality with aesthetic appeal.

One of the standout features of the HA4600 is its sizeable 46-inch screen, which offers ample screen real estate for multitasking and immersive viewing experiences. With a Full HD resolution of 1920x1080 pixels, users can enjoy sharp images and clear text. This resolution allows for vibrant colors and sharp contrasts, making it suitable for graphic design, video editing, and gaming.

The HA4600 utilizes an advanced LED backlight technology, delivering high brightness levels up to 500 cd/m2. This results in enhanced visibility in various lighting conditions, whether in a dimly lit room or a brightly lit office. The monitor also boasts a wider color gamut, which ensures that colors are more accurate and vivid, enhancing the overall viewing experience.

Another compelling characteristic of the HA4600 is its viewing angles. It features a wide viewing angle of up to 178 degrees both horizontally and vertically. This is particularly useful for collaborative work environments where multiple viewers need to share the same display without compromising on image quality.

Connectivity options on the HA4600 are comprehensive, including HDMI and VGA ports, which enable users to connect multiple devices seamlessly. This multi-device compatibility is ideal for those who frequently switch between computers, gaming consoles, and other multimedia devices.

Additionally, the monitor is equipped with various ergonomic features to enhance comfort during extended use. It has adjustable settings for height, tilt, and swivel, allowing users to customize their viewing positions for optimal comfort. This focus on ergonomics helps reduce the strain on the neck and eyes during long sessions of usage.

In terms of energy efficiency, the HA4600 meets several international standards, making it a more sustainable choice for environmentally conscious consumers. Its design incorporates environmentally friendly components and low power consumption, aligning with green energy use initiatives.

In summary, the Hanns.G HA4600 is a robust and versatile monitor that combines superior display technology with ergonomic design. Ideal for a range of applications, from professional tasks to immersive gaming, the HA4600 is built to provide a reliable and enjoyable viewing experience across diverse environments. Its blend of features, from high brightness and wide viewing angles to extensive connectivity and eco-friendly operation, makes it a standout choice for any user in need of a high-quality monitor.