Mike Shipley, Developing | Inova LA-2A specs

legendary Bill Putnam's company, Studio Electronics Corp shortly before he changed the company’s name to UREI®. Three different versions of the LA-2A were produced under the auspices of these different companies before production was discontinued around 1969.

Developing the 1176

It was Bill Putnam himself who, in 1966, was responsible for the initial design of the 1176. Its circuit was rooted in the 1108 preamplifier which was also designed by Putnam. As is evident from entries and schematics in his design notebook, he experimented with the recently developed Field Effect Transistor (F.E.T.) in various configurations to control the gain reduction in the circuit. He began using F.E.T.s as voltage variable resistors, in which the resistance between the drain and the source terminals is controlled by a voltage applied to the gate. His greatest challenge was to ensure that distortion was minimized by operating the F.E.T.s within a linear region of operation.

After several unsuccessful attempts at using F.E.T.s in gain reduction circuits, Putnam settled upon the straightforward approach of using the F.E.T. as the bottom leg in a voltage divider circuit, which is placed ahead of a preamp stage.

The output stage of the 1176 is a carefully crafted class A line level amplifier, designed to work with the (then) standard load of 600 ohms. The heart of this stage is the output transformer, whose design and performance is critical. Its primary function is to convert the unbalanced nature of the 1176 circuit to a balanced line output, and to provide the proper impedance matching to drive the line impedance of 600 ohms. These two jobs are accomplished by the primary and secondary windings whose turns' ratio defines the impedance ratio.

This transformer is critical due to the fact that it uses several additional sets of windings to provide feedback, which makes it an integral component in the operation of the output amplifier. Putnam spent a great deal of time perfecting the design of this tricky transformer and carefully qualified the few vendors capable of producing it.

The first major modification to the 1176 circuit was designed by Brad Plunkett in an effort to reduce noise--hence the birth of the 1176LN, whose LN stands for low noise. Numerous design improvements followed, resulting in at least 13 revisions of the 1176.

Legend has it that the D and E blackface revisions sound the most "authentic".

More Than a Vintage Fad: Classic Sound

Both the 1176 and the LA-2A remain in daily use. Busy engineers’ and producers’ comments about both the 1176 and the LA-2A demonstrate their impact on the industry:

Mike Shipley

Mike Shipley (Def Leppard, Shania Twain, Blondie): "I grew up using 1176s --- in England they were the compressor of choice. They're especially good for vocals, which is also what I primarily use the LA-2 for. Most anything else I can do without, but I can't be without at least a pair of 1176s and an LA-2A. For example, on the Enrique Iglesias project I'm

LA-2A specifications

The Inova LA-2A is a sophisticated optical compressor renowned for its classic design and exceptional sound quality. Hailing from the lineage of legendary optical compressors, the LA-2A combines vintage warmth with modern reliability, making it a staple in professional recording studios globally.

One of the main features of the LA-2A is its opto-electronic gain reduction circuit, which utilizes a light-dependent resistor (LDR) and a sealed optical element to achieve compression. This unique mechanism provides a smooth and transparent compression, allowing the audio signal to maintain its natural dynamics while controlling peaks effectively. The optical design contributes to a musical response, widely regarded as one of its defining characteristics.

The LA-2A also features a simple and intuitive interface. It includes essential controls such as Peak Reduction, which adjusts the level of gain reduction, and Make-Up Gain, which compensates for any lost level after compression. The device typically has two modes: the Compress mode for moderate compression and the Limit mode for more aggressive limiting. This flexibility makes it suitable for a variety of audio sources, from vocals to instruments.

Another noteworthy characteristic is its true tube circuitry. The LA-2A employs a vacuum tube in its audio path, contributing to its warm tonal character. This tube coloration enhances the richness of audio signals, making the device particularly popular for vocals and bass, where presence and depth are paramount.

Additionally, the build quality of the LA-2A is exceptional. The chassis is constructed from durable materials, ensuring longevity and reliability in demanding studio environments. Its vintage aesthetic features analog VU meters, adding to its charm while providing visual feedback of the gain reduction.

Inova has modernized the LA-2A with contemporary features while preserving its classic sound. Enhanced technologies such as improved signal-to-noise ratio and updated component designs ensure that the LA-2A remains competitive in today's digital landscape.

Ultimately, the Inova LA-2A is a beautifully crafted compressor that delivers a unique sonic signature. It combines vintage appeal with modern functionality, making it an essential tool for audio engineers and music producers seeking to achieve professional-grade mixes. Its smooth compression characteristics, intuitive controls, and durable design are testaments to its lasting legacy in the world of audio processing.