NuTone VSC4S installation instructions Installation

VSM4SK AND VSUC4SK VIDEO DOOR ANSWERING REPRESENTATIVE WIRING ILLUSTRATION

VSM4SK	VSUC4SK
INSTALLATION	Note to Installer: Do not discard these instal-
	lation instructions. Please give all installation
CONTENTS OF CARTON	instructions, warranty registration and home-
	owner’s manual to homeowner.
	PRECAUTIONS AND GUIDELINES

		The NuTone VSC4S door camera has been designed to
		work with NuTone models VSM4SK or VSUC4SK.
		Please read and follow ALL installation instructions,
		guidelines and precautions. Any deviation from these
		instructions or miswiring combinations will cause the
		unit to fail and all NuTone warranties will be void.
		Following are the installation instructions for the VSC4S
		Camera. Please refer to the installation instructions
		and homeowners manual packed with the VSM4SK
		or VSUC4SK when installation and operating these
		models.
		WARNING: 120 Volt AC power to the VSM4SK
Check (_) for following VSC4S carton contents:		rough-in and VSUC4SK monitor must remain
♦	VSC4S Door Camera with mounting frame and	off until all system wiring and product mount-
		ing at the monitor and camera is complete.
	rubber gasket
♦		• Observe all local regulations and codes in your area.
	Hardware bag assembly containing:
		• All screw terminals at the camera, VSM4SK or
	(2) #6 x 1 1/4" screws	VSUC4SK must be secure.
	(2) #6 x 3/4" machine screws	• Observe all color codes of wires when connecting cam-
		era to VSM4SK or VSUC4SK.
♦	(1) 4mm camera attachment screw	• The VSC4S is designed to be used with category 5, or
	Installation Instructions	category 6 cable (purchased separately). The use of
		cable other than category 5, or category 6 cable will
		void all NuTone warranties and may result in faulty
		installation and improper operation.
		• The door camera must not be mounted in an area
		that would be subject to direct sunlight or a strong
		reflection from the sun.

5