Advanced operations
Using alternative power sources
You can choose any of the following power sources for your camcorder: battery pack, the house current, alkaline battery and 12/24 V car battery. Choose the appropriate power source depending on where you want to use your camcorder.
Place | Power source | Accessory to be used |
|
|
|
Indoors | House current | Supplied AC power adaptor |
|
|
|
Outdoor | Battery pack | Battery pack |
|
|
|
| Size AA (LR 6) Alkaline battery | Battery case (supplied) |
|
|
|
In the car | 12 V or 24 V car battery | DC pack |
|
|
|
Note on power sources
Disconnecting the power source or removing the battery pack during recording or playback may damage the inserted tape. If this happens, restore the power supply again immediately.
This mark indicates that this product is a genuine accessory for Sony video product. When purchasing Sony video products, Sony recommends that you purchase accessories with this “GENUINE VIDEO ACCESSORIES” mark.
Using the house current
To use the supplied AC power adaptor:
(1)Connect the power cord to a wall outlet. Insert the top of the connecting plate of the AC power adaptor into the top of the battery mounting surface. Push the connecting plate so that it attaches firmly.
(2)Set the selector to VTR (DC OUT).
2
3
1
Advanced operations
WARNING
Power cord must only be changed at qualif ied service shop.
PRECAUTIONS
The set is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the set itself has been turned off.
19