MasterPage: Left 
18 EN VIDEO RECORDING |
|
LCD Monitor And Viewfinder | Zooming |
While using the LCD monitor:
Make sure the viewfinder is pushed back in. Pull on the end 
of the LCD monitor and open the LCD monitor fully. It can rotate 270° (90° downward, 180° upward).
While using the viewfinder:
Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.
180˚
90˚
NOTES:
●The image will not appear simultaneously on the LCD monitor and the viewfinder. When the viewfinder is pulled out while the LCD monitor is opened, you can select which one to use. Set “PRIORITY” to the desired mode in SYSTEM Menu. ( pg. 22, 25)
●Coloured bright spots may appear all over the LCD monitor or the viewfinder. However, this is not a malfunction. ( pg. 39)
Produces the zoom in/out effect, or an instantaneous change in image magnification.
Zoom In
Slide the Power Zoom Lever towards “T”.
Zoom Out
Slide the Power Zoom Lever towards “W”.
●The further you slide the Power Zoom Lever, the quicker the zoom action.
Zoom in (T: Telephoto)
1 xW
T
1 0 xW
T
20xW
T
40xW
T
Zoom out (W: Wide angle)
10 x W
T
Digital zoom zone
25X (optical) zoom zone
Approximate zoom ratio
NOTES:
●Focusing may become unstable during Zooming. In this case, set the zoom while in Record- Standby, lock the focus by using the manual focus ( pg. 29), then zoom in or out in Record mode.
●Zooming is possible to a maximum of 800X, or it can be switched to 25X magnification using the optical zoom. ( pg. 23)
●Zoom magnification of over 25X is done through Digital image processing, and is therefore called Digital Zoom.
●During Digital zoom, the quality of image may suffer.
●Macro shooting (as close as approx. 5 cm to the subject) is possible when the Power Zoom Lever is set all the way to “W”. Also see “TELE MACRO” in MANUAL Menu on page 24.
●When shooting a subject close to the lens, zoom out first. If