Classe Audio cp-700 owner manual English, 4Fkey Controls

ENGLISH

20

Note:

•The Bal (balance) key takes you directly to the balance screen in the menu system; once there, you can use the navigation keys on the remote to select either the left or right buttons on the LCD touchscreen, depending on which way you wish to move the balance. Adjust the relative left-right balance of the system by using the Enter key on the remote to “press” the appropriate button on the display.

•Up/Down/Left/Right keys allow you to move within a particular menu screen, changing the highlighted item up/down/ left/right as you like, from the comfort of your listening position.

•The Enter key allows you to select the highlighted item, having the same effect as if you had pressed the button on the LCD touchscreen.

•The Tape key is not a navigation key, per se, but allows you to easily toggle between listening to the selected source and listening to the output of your recording device. If you have a recording device (such as a three-head tape deck) which can play back a recording while it is being made, you will be able to compare the original signal to the recording while you are making it.

4Fkey Controls

The CP-700 remote control can also control user-defined functions as well. The F1/F2/F3/F4 keys are available for controlling aspects of the CP- 700 not covered by the other buttons on the remote control.

You are able to choose what the CP-700 should do in response to receiving the infrared signal that a particular Fkey has been pressed. The list of possible functions is quite extensive, and is found in the menu system (see the next section in this manual, entitled The Menu System).

The Fkeys on all Classé remote controls issue the same infrared commands. This saves you from having to be sure you have picked up the proper remote, since all your Classé remotes will perform the same function for each Fkey.