Classe Audio cp-700 owner manual Rear Panel, English, 1Tape Input, 2Single-endedRCA inputs

ENGLISH

optional phono preamp

14

Rear Panel

1Tape Input

Connect the analog outputs of any recording device (analog tape recorder, digital tape recorder, CD recorder, etc.) you may have to these single-ended RCA connectors. You may select to hear the output of your recording device by touching the tape button on the main operational screen of the CP-700.

2Single-ended (RCA) inputs

These RCA jacks accept right-channel and left-channel (single-ended) inputs from line-level source equipment such as tuners, CD players, and tape decks. Any of these inputs may be selected by touching the corresponding button on the main operational screen of the front panel touchscreen.

To achieve the best possible results, we suggest that you use only high- quality, shielded interconnect cables. Please consult with your local Classé dealer for advice on the best cables for use in your system.

If you have a turntable you would like to use with the system, an optional phono preamplifier module is available from your Classé dealer. Once installed in your preamplifier, the Line 1 input connectors become your phono inputs, and the phono gain control in the menu system becomes active, allowing you to select either low gain for all moving-magnet (MM) and high-output moving-coil (MC) cartridges, or high gain for standard output MC cartridges. (See the section The Menu System for more information.)

3Balanced (XLR) inputs

These XLR jacks accept right-channel and left-channel balanced signals from source equipment with balanced outputs. Either of these inputs may be selected by touching the corresponding button on the main operational screen of the LCD touchscreen.