JVC GR-D247 manual Exposure Control, To return to automatic exposure control

MasterPage: Left GR-D247PAL.book Page 30 Thursday, November 18, 2004 12:24 PM

30 EN FEATURES FOR RECORDING
Exposure Control	Iris Lock

Manual exposure control is recommended in the following situations:

●When shooting using reverse lighting or when the background is too bright.

●When shooting on a reflective natural background such as at the beach or when skiing.

●When the background is overly dark or the subject is bright.

1 Set the Power Switch to “M”.

2 Set “p” to “MANUAL”. (
pg. 22)

●The exposure control indicator appears.

3 To brighten the image, press +. To darken the image, press –. (maximum ±6)

●+3 exposure has the same effect as the backlight compensation. (
pg. 31)

●–3 exposure has the same effect as when “r” is set to “SPOTLIGHT”. (
pg. 34)

4 Press MENU. Exposure adjustment is complete.

To return to automatic exposure control

Select “AUTO” in step 2. Or, set the Power Switch to “A”.

NOTES:

●You cannot use the manual exposure control at the same time when “r” is set to “SPOTLIGHT” or “SNOW” (
pg. 34), or with the backlight compensation.

●If the adjustment does not cause any visible change in brightness, set “GAIN UP” to “AUTO”. (
pg. 22, 23)

Like the pupil of the human eye, the iris contracts in well-lit environments to keep too much light from entering, and dilates in dim environments to allow in more light.

Use this function in the following situations:

●When shooting a moving subject.

●When the distance to the subject changes (so its size in the LCD monitor or the viewfinder changes), such as when the subject is backing away.

●When shooting on a reflective natural background such as at the beach or when skiing.

●When shooting objects under a spotlight.

●When zooming.

1 Set the Power Switch to “M”.

2 Set “p” to “MANUAL”. (
pg. 22)

●The exposure control indicator appears.

3 Adjust zoom so that the subject fills the LCD monitor or the viewfinder, then press and hold MENU for over 2 seconds. The exposure control indicator and the “” indication appear.

4 Press MENU. The “” indication changes to “” and the iris is locked.

To return to automatic iris control

Select “AUTO” in step 2. Or, set the Power Switch to “A”.

●The exposure control indicator and “” disappear.

To lock the exposure control and the iris

After step 2, adjust the exposure by pressing + or –. Then lock the iris in steps 3 and 4. For automatic locking, select “AUTO” in step 2. The exposure control and the iris become automatic.