Preparations (Step 1 Connection and Installation)
Cable Connections (continued)
4. Connecting Coaxial cable
Connecting a RG-59 coaxial cable.
Note
Fold back the mesh wires and secure them with insulation tape in order to prevent them from becoming loose and thus causing a short circuit.
If the cable is extended, the signal attenuation is increased, the resolution drops and the noise in- creases. Should it be required to extend the cable, use a thicker cable or a cable length compensa- tor.
Polyethylene | Mesh wires |
Conductor |
|
wire |
|
7 | 17 |
(5) | (12) |
| Insulation tape |
Note
The figures inside the brackets ( ) are the dimensions when the coaxial cable is dis- tributed from the side of the cover.
(Unit : mm)
| Provided screw |
Provided cable | Screw removed in |
the figure on the left | |
plate |
|
To feed the coaxial cable through the cap on the side of the cover, change the positioning of the cable plate as shown below.
16