JVC VN-C655U manual Settings Setting the Network, Installing V.Networks Setup Tool

Settings (Step 2 Setting the Network)

Installing the Software

For operating VN-C655, install the software from the CD-ROM, which is supplied with the camera in the following procedure. ~~~~~~~~~~~~~~~~

Installing V.Networks Controller

1.Select [Setup.exe] found in the [JVC] folder.

2.Proceed by following the instructions shown on the screen.

3.If the installation is successfully executed, the [V.Networks] icon is created in [Programs] of the

Windows [Start] menu. [V.Networks Controller] is displayed in [V.Networks].

Installing V.Networks Setup Tool

1.Open the [JVC] folder and then the ÒsetupÓ folder inside. Select [Setup.exe].

2.Proceed by following the instructions shown on the screen.

3.If the installation is successfully executed, the [V.Networks] icon is created in [Programs] of the

Windows [Start] menu. [vn-c655u Setup Tool] is displayed in [V.Networks].

Operation of V.Networks Controller with DirectX9.x or Windows Media Player9.x.

If DirectX9.x or Windows Media Player9.x are installed on your PC, the V.Neworks controller may not work properly regarding viewing MPEG4 image of the VN-C10/VN-C11U. (Black image is displayed) In such a case, please follow the steps below. (No malfunction has been found by now)

1.In command prompt, type Òregsvr32.exe /u mp4sdmod.dllÓ and press ÒEnterÓ to delete the registration of the Mpeg4d Decoder DMO.

2.In command prompt, type Òregsvr32.exe mp4sds32.axÓ and press ÒEnterÓ to delete the registration of the Microsoft MPEG4 Video Decompressor.

If success, the message ÒDllRegistreServer in mp4sds32.ax succeeded.Ó be shown.

23