JVC GR-DV33 manual Tape Remaining Indicator, Brightness Control, Viewfinder Indications

Page 19

NOTES:

●Be careful not to cover the camera sensor; built-in here is the sensor necessary for shooting.

●If 5 minutes elapse in the Record-Standby mode, power shuts off automatically to conserve energy and protect the heads. To turn the camcorder on again, push back and pull out the viewfinder again. As long as you don’t take out the tape you were using or play it back, you can continue from where you left off with no noticeable break on the recorded video.

●When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape.

Continue recording from where you stop so there

are no gaps by following “Recording from the middle of a tape” (☞ pg. 20).

●Record-Standby means that a tape is loaded and the camcorder is ready to record.

●During recording, sound is not heard from the speaker. If you want to hear the sound, connect optional headphones to the headphones jack. The sound volume at this point is the same as the level it was adjusted during playback.

●To make the indications disappear, press and hold the IND.ON/OFF button for more than approx. 1 second. However, it is impossible to remove the

tape running indicator “ 444” and warning indications and so on (☞ pg. 79).

●When the battery remaining power indicator

appears as , that means the battery power is close to nil. When the battery power is exhausted, power turns off automatically.

EN19

Tape Remaining Indicator

The time remaining on the tape is automatically monitored and displayed (☞ pg. 77). When the tape ends, “TAPE END” appears. If the indications are turned off, the tape remaining indicator appears when remaining time reaches 2 minutes.

Display

90 min

REC

2 min 3 min 89 min

blinking

1 min

 

0 min

 

blinking blinking

Brightness Control

You can adjust the brightness of the display by rotating the Select Dial.

BRIGHT – – – – –6– – – – –

1 ADJUST BRIGHTNESS

Rotate the Select Dial until the brightness indicator moves and the display reaches its appropriate brightness.

•The brightness indication appears on the display.

Viewfinder Indications

You can make the Viewfinder indications appear/ disappear.

1 PRESS IND.ON/OFF BUTTON When you do not want the indications to appear, press the IND.ON/OFF button for longer than approximately 1 second. Certain indications disappear.

Press again for longer than approx. 1 second to make the indicaitons reappear.

NOTE:

It is impossible to make the tape running indicator and warnings etc. disappear from the viewfinder. For the indications that can be removed, ☞ pg. 77.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents GR-DV33 It is recommended that you Dear CustomerSafety Precautions VIDEO/AUDIO cable DC cordAA-V60EG Grip/Hand strapRM-V712U DVM-30 M-DV30ME Lithium battery CR2025 for remote control unitVideo Area Audio Area Sub-Code AreaITI Insert and Tracking Information Area Contents Charging The Battery Pack Close Battery Cover Installing The Battery PackOpen Battery Cover Insert Charged BatteryConnect DC Cord to AC Charger Station Using The Battery HolderSupply Power to AC Charger Station Indoor UseDisplay Date/Time SettingsSelect Operation Mode Input Date and TimeTo protect valuable recordings Loading/Unloading a CassetteOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingSelect Dial Attach Grip Strap to SUB Hand Strap Eyelet Adjust LengthGrip Strap Attachment Attach Grip Strap to Hand Strap EyeletTurn on Camcorder Dioptre AdjustmentAdjust Dioptre Tripod MountingInsert Battery in Holder Remote Control UnitInstalling The Battery Pull OUT Battery HolderFunction Operation ModePower Dial Position Self-Timer Playback PlaySelect Dial IND.ON/OFF button Start RecordingStop Recording END RecordingViewfinder Indications Tape Remaining IndicatorAdjust Brightness Brightness ControlRecording From The Middle Of a Tape Time Code When blank portion is recorded on a tapeProper recording Zoom EN RecordingSelect Function Displaying The Date And Time During RecordingSelect Dial Menu button IND.ON/OFF button Scene 5-second recording Engage 5S ModeDissolves during 5 second mode recording To Take a Snapshot In The 5-Second ModeEND SELF-TIMER Recording Self-TimerEngage SELF-TIMER Mode Stop SELF-TIMER RecordingTake Snapshot Access System MenuSelect Snapshot Mode SnapshotMotor Drive mode Select Dial Menu button Display MenusClose Recording Menu Recording Menu allows you to set these functionsWide Mode REC Mode Recording modeDIS Digital Image Stabilizer Zoom Zoom magnificationClose System Menu System MenuPhoto Mode FADE/WIPE Effects Accessmenu Manual Mode ItemAccess FADER/WIPE Menu To Cancel FADE/WIPE EffectsWH , BK , , B W Fades and WipesExample WH Fader White Example Wipe ScrollResume Recording Picture Wipe/DissolveP and P of the Fader/Wipe Menu Random Variations Fader and Wipe Menu Random Fader and Wipe MenuAE/Effects Disable P.AE/EFFECTSlow Slow Shutter To Change To Auto Focus Manual Focus AdjustmentAccess Manual Focus Adjust FocusTo Return To Automatic Exposure Control Adjust ExposureExposure Control Brightness control of the displayTo Return To Automatic Iris Control Iris LockIris To Return To Automatic White Balance White Balance AdjustmentAccessment White Balance Adjust Closement White Balance AdjustTo Change The Tint For Recording Enter SettingExit Manual White Balance Adjustment Manual White Balance OperationEND Playback DisplayRewind Tape Viewing RecordingTo Perform High-Speed Search Still PlaybackEND Zoom Playback ZoomActivate Zoom Locatescene Portion of MagnifiedPlayback Effects Accessmenu Playback Effect SelectPlayback Menu allows you to set the following functions Access Playback MenuPlayback Menu Close MenuDisplaying the Date During Playback Playback SoundDisplaying The Time Code During Playback Turn on Power VCR/TV Connection when connecting directly to the camcorderSelect TV’S Video Mode Confirm POWER-OFF Status VCR/TV Connection using AC Charger StationAttach and Lock Basic Connections Connect AC Charger Station to TV or VCR To DV in connector Connection To a Video Unit Equipped With a DV ConnectorDigital Printer Attach Camcorder to AC Charger Station Supply PowerRecording deck DubbingMake Connections Start Playback Pause RecordingMake Connections Digital DubbingOperate VCR Brand SettingExecute FADE/WIPE in if Necessary Random Assemble EditingUSE P.AE/EFFECT if Necessary USE Fade Wipe on Scene Transition if NecessaryPress FADE/WIPE Start Editing Engagemode Vcrs RECORD-PAUSEStop Editing Prepare for R.A. Edit Play Back Dubbed Scene For More Accurate EditingChoose a Scene Recording deck Select Dial Input Correction DataEngage Audio DUB Standby Audio DubbingFind EDIT-IN Point Pause During Dubbing Stop DubbingRecording Sound Display Output Sound Troubleshooting Possible Causes Troubleshooting Phones connecto Viewfinder Camcorder’s functions Clean Viewfinder Cleaning The CamcorderRemove Power Supply Clean LensCamcorder Bottom of camcorder Battery cover open switch Battery pg Power dial pgZoom switch T/W pg OPEN/EJECT switch pgAC Charger Station Function Indications During RecordingIndications During Playback Indications Function During use To avoid hazardStore cassettes Do not leave the unit For safety, do notAvoid using the unit Dirty heads can cause the following problemsVideo GeneralAudio Audio ConnectorsOutput power VideoOn-screen display Colour temperatureAC Charger Station Auto focusIndex Memo Memo GR-DV33

GR-DV33 specifications

The JVC GR-DV33 is a compact and versatile MiniDV camcorder that was designed with both amateur and semi-professional videographers in mind. Known for its unique blend of compact design and quality features, the GR-DV33 was a popular choice in the early 2000s, catering to users who sought portability without compromising on technology.

At the heart of the GR-DV33 is its 1/6-inch CCD sensor, delivering sharp and vibrant video quality with an impressive resolution. This camcorder supports a maximum recording resolution of 720x480, which, while modest by today's standards, was significant at the time for producing clear images and faithful colors in various lighting conditions.

One of the standout features of the JVC GR-DV33 is its advanced digital image stabilization technology. This technology minimizes the effects of shaky hands, ensuring smoother video playback, which is especially beneficial for outdoor and action shots. Users appreciated how this feature helped create more professionally looking videos without the need for bulky stabilizing equipment.

The GR-DV33 also incorporates a 20x optical zoom lens, which allows users to capture distant subjects with remarkable clarity. Coupled with a 100x digital zoom option, the camcorder enables users to explore creative angles and shots, from wide landscapes to close-up details. The built-in autofocus system further enhances usability, ensuring sharp focus on subjects even during dynamic shooting situations.

In terms of connectivity, the JVC GR-DV33 is equipped with various output options including USB and FireWire ports. This allows for easy transfer of footage to computers for editing or sharing online, making it a great option for budding filmmakers. Moreover, the camcorder features an LCD screen that can be flipped and turned to allow for flexible shooting angles, alongside an electronic viewfinder for traditional framing.

Another notable characteristic is the camcorder's low-light performance, enhanced by its NightAlive mode, which enables users to record in dim conditions while maintaining a usable level of quality. This feature is particularly appealing to users looking to capture events in poorly lit environments.

The JVC GR-DV33, while no longer cutting-edge, remains a testament to the era of MiniDV camcorders and is fondly remembered for its reliable performance and ease of use. Whether documenting family events, trips, or personal projects, this camcorder provides a solid foundation for capturing lasting memories with a straightforward and user-friendly design.
Top Page Image Contents